Radio Shack PRO-79 owner manual Locking Out Frequencies, Reviewing Locked-Out Frequencies

To remove the lockout from a channel, manually select that channel again, then hold down L/O/L/O RVW until L/O disap- pears.

Notes:

•Your scanner automatically locks out empty channels.

•You can still manually select locked-out channels.

Locking Out Frequencies

To lock out a frequency during a service bank or direct search, press L/O/L/O RVW when the scanner stops on that frequency. The scanner locks out the frequency then continues searching. You can lock out frequencies in both direct search and service bank searches.

Note: You can lock out as many as 50 frequencies during a search. If you try to lock out more, FLo -FULLappears (see “Reviewing Locked-Out Frequencies” and “Removing Lockouts From All Frequencies”).

Reviewing Locked-Out Frequencies

To review the frequencies you locked out, hold down L/O / L/O RVW for about 2 seconds during a search, then repeatedly press

▲or ▼. L-rappears and the scanner displays all locked out frequencies as you press ▲ or ▼. When you reach the highest locked-out frequency, the scanner beeps twice and returns to the lowest locked-out frequency.

Removing Lockouts From All Frequencies

1.Hold down L/O/L/O RVW for about 2 seconds during a ser- vice bank or direct search. L-rappears.

2.While holding down MON/CL, hold down L/O / L/O RVW. Flo ALL-CLappears.

3.Press ENT. L-r 000.000 appears. The scanner clears any lockouts from all frequencies. Or, if you do not want to clear the lockouts, press MON/CL.

4.To continue searching, press BAND.

37