Radio Shack Race Scanner owner manual Connecting an Optional Antenna

Page 14

Connecting an Optional Antenna

The scanner’s antenna jack makes it easy to use the scanner with a variety of antennas. Instead of either of the supplied antennas, you can attach a different one, such as an external mobile antenna or outdoor base station antenna. Your local RadioShack store sells a variety of antennas.

Always use 50-ohm coaxial cable, such as RG-58 or RG-8, to connect an outdoor antenna. For lengths over 50 feet, use RG-8 low-loss di- electric coaxial cable. If your antenna’s cable does not have a BNC connector, use a BNC adapter, available at your local RadioShack store.

Follow the installation instructions supplied with the antenna, route the antenna cable to the scanner, then connect it to the antenna jack fol- lowing the steps in “Connecting an Antenna” on Page 13.

Warning: Use extreme caution when installing or removing an outdoor antenna. If the antenna starts to fall, let it go! It could contact overhead power lines. If the antenna touches a power line, contact with the an- tenna, mast, cable or guy wires can cause electrocution and death! Call the power company to remove the antenna. Do not attempt to do so yourself.

Cautions:

Do not run the cable over sharp edges or moving parts.

Do not run the cable next to power cables or other antenna cables.

Do not run the cable through a vehicle’s engine compartment or other areas that produce extreme heat.

Follow all cautions and warnings included with the antenna.

14

Image 14
Contents PRO-74 100-Channel VHF/UHF/Air/800 MHz Race Scanner Features Page Frequency Range Step Transmission MHz KHz FCC Notice Scanning LegallyContents Care and Maintenance Specifications Special FeaturesTroubleshooting General Guide to ScanningPreparation Power SourcesUsing Internal Batteries Page Charging Nickel-Cadmium Batteries Using Standard AC Power Using Vehicle Battery Power Connecting AN Antenna Connecting an Optional Antenna Connecting AN Extension Speaker Connecting AN Earphone HeadphonesListening Safely Traffic SafetyAttaching the Belt Clip Understanding Your Scanner Look AT the KeypadPage Look AT the Display Page Memory Banks Service BanksUnderstanding Banks Name Typical Usage Frequency Range MHzHAM Turning on the Scanner Setting Squelch OperationStoring Known Frequencies Into Channels Press E to store the frequency into the channelSearching the Service Banks Finding and Storing Active FrequenciesSearching from a Selected Frequency Search Skip Memory Storing Active FrequenciesManually Selecting a Channel Scanning Channels Deleting a Frequency from a ChannelListening to Weather Broadcasts Using the PRO-74 AT the Races Storing a CAR Number and FrequencyAdding Frequencies to a Car Number Deleting a Frequency from a Car Number Scanning by CAR NumberViewing Frequencies Associated with a Car Number Finding What CAR Numbers are in What Channels Locking OUT Channels Special FeaturesTurning Memory Banks on and OFF PriorityN K Changing Search Speeds Using the KeylockUsing the Display Backlight Normal Search HypersearchTurning the Battery Save Function OFF/ON Turning the KEY Tone OFF/ONSkipping Data Signals National Weather Frequencies General Guide to ScanningGuide to Frequencies Canadian Weather FrequenciesBirdie Frequencies VHF Band Guide to the Action BandsTypical Band Usage UHF BandAbbreviations Band AllocationPrimary Usage Very High Frequency VHF Meter Amateur Band- 50-54 MHz Ultra High Frequency UHF Frequency Conversion Conventional Systems Band Locally AssignedTroubleshooting Problem Possible Cause RemedyResetting the Scanner BATT.LoCare and Maintenance Specifications Limited One-Year Warranty RadioShack Division of Tandy Corporation Fort Worth, Texas