A LOOK AT THE DISPLAY
The display has indicators that show the scanner’s current operating status. A good look at the display will help you understand how your scanner operates.
B ANK | 1 2 3 4 5 6 7 8 9 1 0 BATT.Lo K / L | ||
RA CE | P RI DA TA HOLD | W X HYP ER | |
NO. | P |
| |
M R N |
| ||
C H | M H z | ||
| |||
SCAN MA N PG M L/ O S | SEARCH |
BANK — appears with numbers
Service bank indicators — appear when you select the scanner’s ser- vice banks (see “Service Banks” on Page 21).
BATT.Lo — flashes when the batteries are low.
K/L — appears when you lock the keypad.
RACE — appears when you store car numbers and frequencies in the scanner’s channels, add and delete frequencies from car numbers, dis- play car numbers, and move to the channel where a car number is stored.
PRI — appears when you set the scanner to scan the priority channels every 2 seconds.
DATA — appears when you turn on the data skip function.
HOLD — appears during a search hold.
WX — appears when you search the preset frequencies in the weather band.
HYPER — appears when you are using Hypersearch during service bank and direct search. However, HYPER disappears when the scan- ner searches any frequency bands other than the 5 kHz step bands.
19