PROBLEM | POSSIBLE CAUSE | REMEDY |
|
|
|
|
|
|
BATT.Lo | The batteries are | Recharge rechargeable |
appears. | weak. | batteries, or replace non- |
PROBLEM | POSSIBLE CAUSE | REMEDY |
|
| rechargeable batteries. |
|
|
|
Poor or no recep- | Batteries are weak | Check the batteries, or |
tion. | or dead. | make sure the scanner |
|
| is plugged into a working |
|
| AC or DC outlet. |
|
|
|
Error appears. | Frequency entered | |
| incorrectly. | correctly, including the |
|
| decimal point. |
|
|
|
While scanning, the | Stored frequencies | Avoid storing frequen- |
scanner locks on | are the same as | cies listed under “Birdie |
frequencies that | “birdie” frequencies. | Frequencies” on |
have an unclear |
| Page 41, or only listen to |
transmission. |
| them manually. |
|
|
|
RESETTING THE SCANNER
If the scanner’s display locks up or does not work properly after you connect power, you might need to reset the scanner.
Caution: This procedure clears all the information you have stored into the scanner (such as frequencies and car numbers). Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly.
1.Turn off the scanner.
2.While you hold down the 2 and 9 keys, turn on the scanner.
If you still have problems after resetting the scanner, take it to your lo- cal RadioShack store.
49