Radio Shack Race Scanner owner manual Using Standard AC Power

Page 11

Using Standard AC Power

You can power the scanner from a standard AC outlet using an option- al AC adapter (such as Cat. No. 273-1665).

Warning: Do not use an AC adapter’s polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure.

Cautions:

The recommended AC adapter supplies 9 volts and delivers at least 300 milliamps. It has a barrel plug with a center negative tip that correctly fits the scanner’s POWER jack. Using an adapter that does not meet these specifications could damage the scanner or the adapter.

To protect your scanner and AC adapter, always plug the adapter into the scanner before you plug it into the AC outlet, and always unplug the adapter from the AC outlet before you unplug it from the scanner.

If batteries are installed, make sure ALKALINE JACK NI-CDis set to the correct position (see “Using Internal Batteries” on Page 8).

1.Turn VOLUME counterclockwise until it clicks to make sure power is turned off.

2.Plug the adapter’s 3.4 mm outside diameter/1.3 mm inside diame- ter barrel plug into your scanner’s POWER jack.

3. Plug the other end of the adapter into a standard AC outlet.

11

Image 11
Contents PRO-74 100-Channel VHF/UHF/Air/800 MHz Race Scanner Features Page Frequency Range Step Transmission MHz KHz Scanning Legally FCC NoticeContents General Guide to Scanning Special FeaturesTroubleshooting Care and Maintenance SpecificationsPreparation Power SourcesUsing Internal Batteries Page Charging Nickel-Cadmium Batteries Using Standard AC Power Using Vehicle Battery Power Connecting AN Antenna Connecting an Optional Antenna Connecting AN Earphone Headphones Connecting AN Extension SpeakerListening Safely Traffic SafetyAttaching the Belt Clip Look AT the Keypad Understanding Your ScannerPage Look AT the Display Page Name Typical Usage Frequency Range MHz Service BanksUnderstanding Banks Memory BanksHAM Operation Turning on the Scanner Setting SquelchPress E to store the frequency into the channel Storing Known Frequencies Into ChannelsFinding and Storing Active Frequencies Searching the Service BanksSearching from a Selected Frequency Storing Active Frequencies Search Skip MemoryManually Selecting a Channel Deleting a Frequency from a Channel Scanning ChannelsListening to Weather Broadcasts Storing a CAR Number and Frequency Using the PRO-74 AT the RacesAdding Frequencies to a Car Number Deleting a Frequency from a Car Number Scanning by CAR NumberViewing Frequencies Associated with a Car Number Finding What CAR Numbers are in What Channels Priority Special FeaturesTurning Memory Banks on and OFF Locking OUT ChannelsN K Normal Search Hypersearch Using the KeylockUsing the Display Backlight Changing Search SpeedsTurning the KEY Tone OFF/ON Turning the Battery Save Function OFF/ONSkipping Data Signals Canadian Weather Frequencies General Guide to ScanningGuide to Frequencies National Weather FrequenciesBirdie Frequencies UHF Band Guide to the Action BandsTypical Band Usage VHF BandAbbreviations Band AllocationPrimary Usage Very High Frequency VHF Meter Amateur Band- 50-54 MHz Ultra High Frequency UHF Conventional Systems Band Locally Assigned Frequency ConversionProblem Possible Cause Remedy TroubleshootingBATT.Lo Resetting the ScannerCare and Maintenance Specifications RadioShack Division of Tandy Corporation Fort Worth, Texas Limited One-Year Warranty