Setup
Using the Main Power Cut-Off Switch
The Main Power
Always press and hold to turn off iSCAN before switching the Main Power
wWarning: The Main Power
Connecting Earphones or Headphones
For private listening, you can plug 1/8 inch (3.5 mm)
earphones or headphones (not supplied) in the HEADPHONE jack
on top of iSCAN. This automatically disconnects the internal speaker.
Connecting an External Speaker
In a noisy area, an amplified speaker (not included, available at your local RadioShack or RadioShack.com) might provide more
comfortable listening. Plug the speaker cable’s 1/8 inch (3.5 mm) mini- plug into iSCAN’s HEADPHONE jack.
Listening Safety
Do not wear headphones, earphones, or earbuds while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be illegal in some areas. To protect your hearing, follow these guidelines:
•Do not listen at high volume levels. Extended
•Set the volume to the lowest setting. Then turn on your iSCAN and adjust the volume to a comfortable level.
•Avoid increasing the volume. Your ears will adapt to the volume level, so a level that does not cause discomfort could still damage your hearing.
18
Basic Operation
Turn on iSCAN and Set Squelch
1.Slide Main Power
2.Press and hold .
3.Turn SQUELCH to the midpoint (12 o’clock) position.
Squelch
•The higher the squelch is set, the stronger the signal required to break the squelch.
•To hear weaker signals, turn SQUELCH counterclockwise to increase sensitivity
Power
Main Power
19
Basic Operation
Lift cover