Radio Shack PRO-107 manual Weather Modes, Normal Weather Mode, Weather Priority Mode, Limits- Menu

To change Limit Search parameters:

Press MENU while Limit Search is active. The following Limit Search options are available:

	–Limits– Menu
Main Menu	Navigate to iSCAN’s Main Menu.
Search Menu	Navigate to the Search Menu.
Store Channel	Stores a found frequency as an object in the first playlist.
Cancel Changes	Exit the Limits Menu without saving any changes.
Save Changes	Saves your changes and exits the Limits Menu.
Attenuator	Limits the effective range of Limit Search and may help
	reduce interference from strong local transmitters.
	Press /II/SEL or  to enable or disable Attenuator.
Zeromatic	Helps iSCAN tune to exact frequencies when searching.
	Press /II/SEL or  to enable or disable Zeromatic.
Delay	When delay is enabled, iSCAN waits for two seconds
	after a transmission before resuming search. Press /II/
	SEL or  to enable or disable delay.
Lo	Sets the lower frequency for the Limit Search frequency
	range. Follow the on-screen instructions and press ,
	, ,  to edit and save the lower frequency.
Hi	Sets the upper frequency for the Limit Search frequency
	range. Follow the on-screen instructions and press ,
	, ,  to edit and save the upper frequency.

Searching

Weather Modes

iSCAN is a sophisticated and powerful NOAA weather radio receiver. You can use iSCAN to:

•Monitor 24-hour NOAA weather radio broadcasts using Normal

Weather Mode.

•Monitor for severe weather broadcasts while you continue scanning other channels using Weather Priority Mode.

•Monitor for warnings received in your defined geographic area using SAME Standby Mode.

•Quickly access and monitor Skywarn repeater frequencies stored in the Skywarn playlist.

nNote: Your scanner incorporates weather alert as one of its features and is an extremely sensitive high quality receiver for weather frequencies. However, the supplied flex antenna is optimized for general purpose scanning. If you use this scanner as your only means for receiving weather alerts, please check to be sure you are receiving a clear signal on the flex antenna or switch to an external antenna that gives you clear reception of a local NOAA weather broadcast.

Normal Weather Mode

Monitor the National Weather Service’s NOAA weather broadcasts in your area. To listen to NOAA weather broadcasts, press , then press  or  to select the strongest NOAA channel for your area.

Weather Priority Mode

To receive severe weather broadcasts while you continue scanning
other channels, set your local NOAA channel as the Weather Priority
channel. iSCAN samples the Weather Priority channel periodically
to see if the All Hazards 1050 Hz Warning Alert Tone is present. If it
is, the scanner will display an alert and tune to the specified weather	Weather
frequency to monitor the alert.

38 39