Limit Search, Service X- Menu | Radio Shack 20-107, PRO-107 guide

Aircraft	Search civilian and military air frequencies:
	108-118 MHz	Navigation
	118-137 MHz	Civilian Voice
	138-150 MHz	Military Voice (excludes 2m Amateur)
	225-400 MHz	Military Voice

Railroad	Search the Association of American Railroads (AAR) VHF
	railroad frequencies used in the US and Canada.

Amateur	Search amateur radio frequencies:
	28.0-29.7 MHz	10m Band
	50-54 MHz	6m Band
	144-148 MHz	2m Band
	222-225 MHz	1.25cm Band
	420-450 MHz	70cm Band
	902-928 MHz	33cm Band
	1240-1300 MHz	23cm Band

CB	Search the Citizens Band radio frequencies.

Marine	Search the VHF-FM marine radio band.

FRS/GMRS/	Search the FRS, GMRS, MURS, DOT and STAR radio
MURS	frequencies.

To change the Service Search parameters:

Press MENU while any Service Search is active. The following options are available:

	–”Service X”– Menu
Main Menu	Navigates to iSCAN’s Main Menu.

Srvc Srch Menu	Navigates to the Services Menu.

Store Channel	Stores a found frequency as an object in the first playlist.

Cancel Changes	Exits the Service Search Menu without saving changes.

Save Changes	Saves your changes and exits the Service Search Menu.

Attenuator	Limits the effective range of Service Search and may
	help reduce interference from strong local transmitters.
	Press /II/SEL or  to enable or disable Attenuator.

	–”Service X”– Menu
Zeromatic	Helps iSCAN tune to exact frequencies when searching.
	Press /II/SEL or  to enable or disable Zeromatic.
	Zeromatic does not have any effect in channel-based
	searches such as CB, Marine and FRS/GMRS/MURS
	bands.

Delay	When delay is enabled, iSCAN waits for two seconds
	after a transmission before resuming search. Press /II/
	SEL or  to enable or disable delay.

RX Mode	Sets the RX modulation mode to automatic, or forces
	AM mode or FM mode. RX Mode functions in Aircraft
	and Amateur bands. Press  or  to change.

Frequency	For Service Searches that utilize frequency ranges, this
Ranges	option allows you to control which ranges are searched.
	The Frequency Ranges option is available in the Public
	Safety, Aircraft and Amateur Radio Service Searches.
	Press /II/SEL or  to enable or disable frequency ranges.

Limit Search

iSCAN’s Limit Search feature allows you to configure a customized search between the lower and upper frequencies that you choose.

To use Limit Search:

1.Press MENU to access the Main Menu, scroll to Search, and press  to enter to the Searches Menu.

2.Scroll to Limit Search and press  to start the Limit Search.

To store found objects in playlists:

1.Press MENU when you find a frequency you want to store.

3.Press SEL. The new object is added to the first playlist and has the alpha tag “Stored Search.”

nNote: To move the new object to another playlist or edit the alpha tag, use the Object Edit Menu (see page 29) or the PC Application (see page 46).