Radio Shack PRO-82 manual 124#6+10, 5SWGNEJ, Turning On Scanner/Setting Volume Squelch

±"016'"±"

Turning On the

Scanner/Setting

Volume and

Squelch

•To listen to a weak or distant station, turn SQUELCH counterclockwise. If reception is poor, turn SQUELCH clockwise to cut out weak transmissions.

•If SQUELCH is adjusted so you always hear a hissing sound, the scanner will not scan or search properly.

Storing Known

Frequencies Into

Channels

•If you made a

mistake in Step 2, ;hheh appears and the scanner beeps three times when you press ENT. Simply start again from Step 2.

Operation

12'4#6+10

6WTPKPI"1P"VJG"5ECPPGT1 5GVVKPI"8QNWOG"CPF"

5SWGNEJ

1.Turn SQUELCH until the indicator points to MIN before you turn on the scanner.

2.To turn on the scanner, turn VOLUME clockwise until you hear a hissing sound.

3.Turn SQUELCH clockwise, just

until the hissing sound stops.

±

4.To turn off the scanner when you finish, turn VOLUME counterclockwise to OFF.

5VQTKPI"-PQYP" (TGSWGPEKGU"+PVQ"%JCPPGNU

Good references for active frequen- cies are the RadioShack Police Call Guide including Fire and Emer- gency Services, Official Aeronauti- cal Frequency Directory, and Mari- time Frequency Directory. We up- date these directories every year, so be sure to get a current copy.

1.Press PGM. F=C appears. Then enter the channel number (1-200) where you want to store a frequency, then press PGM again.

2.Use the number keys and DELAY/´ to enter the frequen- cy (including the decimal point) you want to store.

3.Press ENT to store the frequency into the channel. ±

24