
Special Features
±"016'"±"
If the scanner did not receive a start or end
bit
do not appear.
then connect the other end of the cable to ![]()
on top of the scanner.
3.Using the software supplied with the programming kit, configure the software to work with your scanner by clicking on Tools, selecting Configuration, then selecting
PRO-89.
4.While pressing ENT and 9, turn on the scanner. F=C and M_h;Zýappear. Then send the data from the PC. Ij7hj and the data being received by the
scanner appears in the order it is received. ±
5.When the scanner
successfully receives all data, ;dZ and <_d_I^ýappear. If the
scanner received an error while receiving data, ;dZ and Z#;hh appear. If the scanner
received a checksum error while receiving data, 9#;hh and a number shown next to 9#;hh
indicates the packet number where the error occurred. ±
40