Radio Shack PRO-82 manual 9KTGF2TQITCOOKPI, When the display turns on Again, release TUNE/CLEAR

2.Insert a pointed object, such as a straightened paper clip, into the reset opening on the side of the scanner. Then

gently press the reset button inside the opening. ±

+0+6+#.+<+0)"6*'"5%#00'4"

#

1.Turn off the scanner, then turn it on again.

2.Hold down TUNE/CLEAR.

3.While holding down TUNE/ CLEAR, insert a pointed object (such as a straightened paper clip) into the reset opening on the side of the scanner, then gently press the reset button inside the opening. The display should turn off.

4.When the display turns on

again, release TUNE/CLEAR.

±

9KTGF"2TQITCOOKPI

You can transfer programming data to your scanner using your home computer and an optional scanner PC programming kit (Cat. No. 20-048, available at your local RadioShack store). The programming kit includes a CD- ROM with the software you need and a connecting cable. ±

1.Make sure your scanner is turned off.

2.Follow the steps provided with the programming kit to connect the cable to your computer and load the software into your computer,

#"+/2146#06"#

This procedure clears all information you stored in the scanner's memory. Initialize the scanner only when you are sure the scanner is not working properly.

±"016'"±"

Resetting the

Scanner

If the scanner still does not work properly, you might need to initialize the scanner (see “Initializing the Scanner”).

Initializing the Scanner

You must release the reset button before releasing TUNE/ CLEAR; otherwise the memory might not clear.

Wired Programming

•If the scanner receives no data from the PC for more than 20 seconds or if you press any key, wired program- ming stops.

•Wired program- ming stops if the scanner receives an empty channel number.

Special Features

39