Radio Shack PRO-82 manual 5GCTEJ$CPMU

±"016'"±"

•To reverse the search direction at

any time, hold down H or G for

about 1 second.

•To search up or down the band in

small increments, repeatedly press H or G. (See “One

Touch Banks” on Page 20 for frequency steps).

•To pause the search while

receiving a signal, press H or G. To

resume searching, hold down H or G.

•To quickly move up or down through the

frequencies, hold down H or G. The

scanner tunes through the fre-

quencies until you release H or G.

•If necessary, you can select search groups using the number keys.

Searching the One Touch Banks

Page 30. To listen to the weather bank, see “Listening to the Weather Band” on Page 31.

1.Press FD/PD, AIR, or HAM. <?h;ý

FeB?9;, 7?h, or >7C appears. After about 2 seconds, the scanner starts searching.

When the scanner finds an active frequency, it stops searching and displays the frequency's number. ±

2.To search for another active

frequency in the selected band, hold down H or G for about 1 second. To search for an active frequency within a sub-band of the fire/police or ham band, press a number key to select the sub-band you want. To select a different band and search for another active fre-quency, repeat Step 1.

Once you find interesting frequen- cies during the search, you can store them into the scanner’s channel-storage banks. Frequen- cies found in the one touch banks are automatically assigned to specific channel-storage banks as shown below. You can quickly scan the channel-storage banks corres- ponding to the one touch banks by pressing a one touch bank key and SCAN/MAN successively.

5GCTEJ"$CPMU	%JCPPGN"5VQTCIG"
	$CPMU
Fire/Police	4, 5
Aircraft	6
Ham	7, 8

26