Honeywell PRO-2200 manual Note The 1 is port, Click OK 6.Select Connect and Remote System

Page 12
Note: The 1 is port "1".

4.Type Telnet XXX.XXX.XXX.XXX 1 <Enter> (IP Address and the number 1)

Note: The 1 is port "1".

5.The Telnet window may or may not connect to Host Name: XXX.XXX.XXX.XXX.

Click OK

6.Select Connect and Remote System

7.Verify the Host Name is the correct IP Address and type: 9999 in Port. Click Connect

Image 12
Contents Part Number PRO22EN PRO-2200 Ethernet Board Installation ManualTD1145 rev0601 Page Contents Fire Safety and Liability Notice WARNINGS AND CAUTIONSPage UNPACKING PROCEDURE DISCLAIMERProduct Liability Mutual Indemnification Limited Warranty Shipping InstructionsConfidentiality HARDWARE SETUP PROGRAMMING ETHERNET DEVICESPRO22EN Programming EQUIPMENT NEEDEDJumper PROGRAMMING THE ETHERNET CARD Note The 1 is port Click OK 6.Select Connect and Remote System8.Press Enter for Setup Mode 10.Your Choice? Enter 0 for server configurationType 1 Enter for Channel 1 configuration 18.Flow=02 Enter Flow Control Enabled19.Port Number=3001 Enter Winpak Pro uses port 20.Select Enter through the rest of the menusRemote IP Adr ---none ---,Port Connect Mode C0 Disconn ModePRO22EN Mounting Diagram BatteryLAN Card Connector Configuration Dip Switches S1Honeywell Security & Data Collection 2700 Blankenbaker Pkwy, Suite Louisville, KY
Related manuals
Manual 20 pages 9.1 Kb Manual 16 pages 41.44 Kb Manual 16 pages 15.65 Kb