Dynaudio Focus loudspeakers owner manual Multi-channel loudspeaker setup, Rear speakers, Subwoofer

Multi-Channel Setup

Rear speakers

3 3

1 2 1

The rear speakers are responsible for the rear sound effects behind the listening position. When using the compact models Focus 110/140 as rear speakers, the speakers can be placed into a shelf, mounted at the rear wall or placed on a stand. This allows you a wide variety of placements, even if your listening room and furniture limit an optimal setup.

Corresponding to the surround format 5.1, 6.1 or 7.1, you need to install additional speakers (see Fig. 10):

15.1: The standard multi-channel setup with two rear speakers.

26.1: An additional rear center speaker is placed between the two rear speakers.

37.1: Two speakers are added on both sides between the front and rear speakers.

Fig. 10 Rear speakers in multi-channel setups.				Subwoofer
			www.fshifi.cn
				Most often a subwoofer w ll be utilized for the LFE-signal in such setups, especially in
				larger listening rooms. The pos t on of the subwoofer will be dependent upon the size of
				the room and its acoustics. Dynaudio re ommends placing the subwoofer close to the
				front speakers, but not too close to any walls, corners or furniture. This helps to sonically
	6	5		integrate the subwoofer in the existing surround channel setup.
4			4	Multi-channel loudspeaker setup
			6
				Thus, a complete multi-channel setup consists of following speakers:

1, 2, 3 Rear speakers (as explained above).

4Front (stereo) speakers.

5Center speaker.

3 3 6 Subwoofer, possible positions (e.g. Dynaudio SUB).

1	2	1	Because there are many different setup options – from 5.1 to 10.2 channel applications –
Fig. 11 5.1, 6.1 and 7.1 multi-channel speaker setup.			and the fact that loudspeaker positioning will also depend upon the room’s shape, please
			consult your Dynaudio dealer for special applications and for placement options.

10 Dynaudio Focus