Dynaudio Focus loudspeakers owner manual Connecting the loudspeakers, Hasn’t loosened

Page 5

Connecting

Connecting

Connecting the loudspeakers

1.Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the cabinet (see Fig. 1). The high quality, gold plated binding posts can accommodate different connection systems:

–4.0 mm banana plugs: The pins can be put directly into the binding post without any tightening necessary.

–Cable spades: Un-tighten the binding posts, insert the spade into the opening, and secure the spade by tightening the posts.

–Bare wires: Un-tighten the binding posts and place the cable into the binding posts. Tighten the posts.

wwwNote .fshifi.cn

• With every connection system, ensure that the contact is tight and has a proper contact area.

	•	Connectors with similar gold plating as the Focus binding posts will typically offer the
Fig. 1 Binding posts at rear of cabinet.		best results and remain corrosion-free.
Fig. 1 Binding posts at rear of cabinet.	•	Please ensure that the positive and negative cables do not make contact with each
		other. Tighten the posts, and check the contact after a few days to make sure that it
		hasn’t loosened.

Dynaudio Focus

3

Image 5

Contents Focus Contents Inhaltsverzeichnis Introduction Used expressions and symbols Safety InstructionsAbout this guide High Sound Pressure LevelsConnecting the loudspeakers ConnectingBest results and remain corrosion-free Hasn’t loosenedWwwChoice.offshifiloud peaker cable.cn Connecting surround speakersBi-wiring/bi-amping General recommendations PositioningExcessive Brightness MiddleWalls Distance to back and side wallsAdapting the bass reflex port Spikes with Sharp Peaks Floor-standing loudspeaker set-upCompact loudspeaker set-up Room and furniture influence Loudspeaker Toe-InGrille Dynaudio see FigLoudspeakers for multi-channel setups Multi-Channel SetupCenter speaker As this is critical aspect of any multi-channel soundstageSubwoofer Multi-channel loudspeaker setupRear speakers Distorted Output Signals Running-in / Care & MaintenanceAre easy to drive, even high quality amps with lower power Cleaning the loudspeakers WarrantyAggressive Cleaning Fluids Wir wünschen Ihnen viel Spaß beim Musik hören Dynaudio EinleitungSicherheitshinweise Verwendete Begriffe und SymboleZu dieser Anleitung Hohe SchallpegelHin eise AnschließenLautsprecher anschließen Hinweis Surround-Lautsprecher anschließenWahl des Lautsprecherkabels Allgemeine Empfehlungen AufstellenIntensive Lichteinwirkung Die folgenden Hinweise beziehen sich auf AbbDie Basswiedergabe anpassen Abstand zu Rückwand und Seitenwänden≥ 0,5 m ReduziertSpikes MIT Spitzen Enden Standlautsprecher aufstellenKompaktlautsprecher aufstellen Frontabdeckung Auf den Hörplatz ausrichtenWohnraumeinrichtung Center-Lautsprecher Mehrkanal-AnlageLautsprecher für eine Mehrkanal-Anlage Rear-Lautsprecher hintere Lautsprecher Aufstellen der Mehrkanal-LautsprecherInbetriebnahme / Pflegehinweise Verzerrte VerstärkersignaleDie Lautsprecher reinigen GarantieAggressive Reinigungsmittel Broschures / Broschüren Technical Specifications / Technische DatenFocus line Subwoofer line Accessories Dynaudio A/S