Dynaudio Focus loudspeakers owner manual Connecting surround speakers, Bi-wiring/bi-amping

Page 6

Connecting

Fig. 2 Amplifier loudspeaker outputs (example).

2.Connect the other cable ends to the loudspeaker outputs of your switched off power amp (see Fig. 2).

Note

Please make sure that the red marked post of the speaker is connected to the red marked output of the amp, and the white or black marked post to the white or black marked output accordingly.

Bi-wiring/bi-amping

Dynaudio loudspeakers feature a carefully fine-tuned cross-over, optimized using selected parts and an advanced circuitry to achieve a truly balanced and smooth frequency response. Therefore, dividing the frequency sections through bi-wiring or bi-amping is neither beneficial nor optional.

wwwChoice.offshifiloud peaker cable.cn

The impact a loud peaker cable can have on sound quality may be dramatic, though in general quality cable products w ll yield a quality result.

Dynaudio loudspeakers are designed to be very neutral and thus are not extremely suited to any particular type of cable. The choice of cable is as much a factor of matching the cable to the entire audio system. Please consult your Dynaudio dealer for information about compatible loudspeaker cables that will suit both your electronics and the Focus loudspeakers.

Connecting surround speakers

When connecting a two-channel stereo system, only the right and left channels are connected to the amplifier.

In a surround set-up, center, side or rear loudspeakers as well as a subwoofer are typivally connected to provide for a multi-channel listening experience. Please refer to the amplifier’s owner manual for particular connection instructions and see chapter “Multi- channel loudspeaker setup” on page 10 for further help.

4

Dynaudio Focus

Image 6 Dynaudio Focus loudspeakers Connecting surround speakers, Bi-wiring/bi-amping, WwwChoice.offshifiloud peaker cable.cn
Contents Focus Contents Inhaltsverzeichnis Introduction About this guide Safety InstructionsUsed expressions and symbols High Sound Pressure LevelsBest results and remain corrosion-free ConnectingConnecting the loudspeakers Hasn’t loosenedConnecting surround speakers Bi-wiring/bi-ampingWwwChoice.offshifiloud peaker cable.cn Excessive Brightness PositioningGeneral recommendations MiddleDistance to back and side walls Adapting the bass reflex portWalls Floor-standing loudspeaker set-up Compact loudspeaker set-upSpikes with Sharp Peaks Grille Loudspeaker Toe-InRoom and furniture influence Dynaudio see FigCenter speaker Multi-Channel SetupLoudspeakers for multi-channel setups As this is critical aspect of any multi-channel soundstageMulti-channel loudspeaker setup Rear speakersSubwoofer Running-in / Care & Maintenance Are easy to drive, even high quality amps with lower powerDistorted Output Signals Warranty Aggressive Cleaning FluidsCleaning the loudspeakers Einleitung Wir wünschen Ihnen viel Spaß beim Musik hören DynaudioZu dieser Anleitung Verwendete Begriffe und SymboleSicherheitshinweise Hohe SchallpegelAnschließen Lautsprecher anschließenHin eise Surround-Lautsprecher anschließen Wahl des LautsprecherkabelsHinweis Intensive Lichteinwirkung AufstellenAllgemeine Empfehlungen Die folgenden Hinweise beziehen sich auf Abb≥ 0,5 m Abstand zu Rückwand und SeitenwändenDie Basswiedergabe anpassen ReduziertStandlautsprecher aufstellen Kompaktlautsprecher aufstellenSpikes MIT Spitzen Enden Auf den Hörplatz ausrichten WohnraumeinrichtungFrontabdeckung Mehrkanal-Anlage Lautsprecher für eine Mehrkanal-AnlageCenter-Lautsprecher Aufstellen der Mehrkanal-Lautsprecher Rear-Lautsprecher hintere LautsprecherVerzerrte Verstärkersignale Inbetriebnahme / PflegehinweiseGarantie Aggressive ReinigungsmittelDie Lautsprecher reinigen Technical Specifications / Technische Daten Focus line Subwoofer line AccessoriesBroschures / Broschüren Dynaudio A/S