Dynaudio Focus loudspeakers Positioning, General recommendations, Excessive Brightness, Middle

Page 7

Positioning

A

BB

Fig. 3 Positioning the loudspeakers.

Positioning

CAUTION

EXCESSIVE BRIGHTNESS

Direct sunlight or excessive brightness can affect the color of any natural wood veneer (the structural integrity of the cabinet will not be affected).

XTo maintain the aesthetic quality of the Focus loudspeakers for the long term, placing such in very warm, very cold, or very humid environments should be avoided.

The Focus range consists of classic bass reflex loudspeaker designs with no unusual or extraordinary positioning demands. Every room will still have its own particular sound characteristics. All rooms are shaped and decorated differently, and therefore remain unique regarding options for positioning loudspeakers. The following steps are

wwwgeneral sugge.fshifitions t at will make.thecnorrect positioning easier to achieve.

General recommendations

Following explanations refer to Fig. 3:

•The distance between each loudspeaker and your listening position should be the same (B). Try to achieve an isosceles triangle.

•The distance between the loudspeakers should be the same or better slightly less than the distance between each loudspeakers and your listening position (A, B).

•The closer the listening position is in relation to the loudspeakers, the closer the speakers can be positioned to each other

•As a starting point, it is recommended that the speakers be about 2 meters apart from each other for the best results (A).

•If the speakers are positioned too close to each other, the stereo image will not seem

A < B

realistic; if that distance is too wide, the image may leave an acoustic hole in the

 

middle.

•Paying attention to the image during listening tests will help dictate optimum placement during experimentation and set-up.

Dynaudio Focus

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Focus Contents Inhaltsverzeichnis Introduction High Sound Pressure Levels Safety InstructionsUsed expressions and symbols About this guideHasn’t loosened ConnectingConnecting the loudspeakers Best results and remain corrosion-freeBi-wiring/bi-amping Connecting surround speakersWwwChoice.offshifiloud peaker cable.cn Middle PositioningGeneral recommendations Excessive BrightnessAdapting the bass reflex port Distance to back and side wallsWalls Compact loudspeaker set-up Floor-standing loudspeaker set-upSpikes with Sharp Peaks Dynaudio see Fig Loudspeaker Toe-InRoom and furniture influence GrilleAs this is critical aspect of any multi-channel soundstage Multi-Channel SetupLoudspeakers for multi-channel setups Center speakerRear speakers Multi-channel loudspeaker setupSubwoofer Are easy to drive, even high quality amps with lower power Running-in / Care & MaintenanceDistorted Output Signals Aggressive Cleaning Fluids WarrantyCleaning the loudspeakers Wir wünschen Ihnen viel Spaß beim Musik hören Dynaudio EinleitungHohe Schallpegel Verwendete Begriffe und SymboleSicherheitshinweise Zu dieser AnleitungLautsprecher anschließen AnschließenHin eise Wahl des Lautsprecherkabels Surround-Lautsprecher anschließenHinweis Die folgenden Hinweise beziehen sich auf Abb AufstellenAllgemeine Empfehlungen Intensive LichteinwirkungReduziert Abstand zu Rückwand und SeitenwändenDie Basswiedergabe anpassen ≥ 0,5 mKompaktlautsprecher aufstellen Standlautsprecher aufstellenSpikes MIT Spitzen Enden Wohnraumeinrichtung Auf den Hörplatz ausrichtenFrontabdeckung Lautsprecher für eine Mehrkanal-Anlage Mehrkanal-AnlageCenter-Lautsprecher Rear-Lautsprecher hintere Lautsprecher Aufstellen der Mehrkanal-LautsprecherInbetriebnahme / Pflegehinweise Verzerrte VerstärkersignaleAggressive Reinigungsmittel GarantieDie Lautsprecher reinigen Focus line Subwoofer line Accessories Technical Specifications / Technische DatenBroschures / Broschüren Dynaudio A/S
Top Page Image Contents