Honeywell 4800dr manual Product Specifications, Parameter Specification

Page 121

11

Product Specifications

Parameter	Specification

Dimensions (Typical):
Height (excluding
cable)	15.13 inches (38.43 cm)
Depth	14.47 inches (36.75 cm)
Width	13.39 inches (34.01 cm)
Weight (typical):
Imager	3 oz. (85g)
Stand	4 lbs. 6 oz. (1.98kg)

Illumination Sources:
Illumination LEDs	White, 440nm and 530nm at < 650µW
Aiming Laser	Red, 645nm - 660nm at < 1mW

Image	1280x960 binary. TIFF, JPEG or BMP output.

Skew Angle	+45 degrees

Pitch Angle	+45 degrees

Motion Tolerance - 100%
UPC	3 inches (7.62cm) per second

Symbol Contrast	Grade 1.0 (20% or greater)

Voltage Requirements	4 - 5.5 VDC at imager

Current Draw (Typical):	Scanning 370mA. Inrush 500mA.

Power Supply Noise
Rejection	Max. 100 mV peak to peak, 10 to 100 KHz

Temperature Ranges:
Operating	+32°F to +122°F (0°C to +50°C)
Storage	-4°F to +140°F (-20°C to +60°C)

Humidity	5 to 95% at 50°C, non-condensing

Mechanical Drop -	Operational after 50 drops from 5 feet
Imager	(1.524m) to concrete

Vibration - Imager	Withstands 5G peak from 22 to 300 Hz

ESD Tolerance	15Kv

11 - 1

Image 121

Contents 4800dr Disclaimer Table of Contents Data Editing UPC-A UPC-A/EAN-13 Interface Keys Product Specifications OCR Programming Chart Getting Started Connecting the Document Reader with USBAbout This Manual Unpacking the Document ReaderConnecting the Document Reader with TTL-232 Serial Port Programming the Interface Plug and Play Supported TerminalsUSB Connection IBM SurePosUSB COM Port Emulation USB PC or Macintosh KeyboardAligning the Document Reader Tray TTL-232 Serial Port ConnectionLinear barcodes 2D Matrix symbols Using the Imager Out of the StandReading Techniques Keyboard Country Terminal InterfacesKeyboard Country Keyboard StyleKeyboard Modifiers TTL-232 Baud Rate TTL-232 Receiver Time-Out RS-232 Word Length Data Bits, Stop Bits, and ParityRS-232 Handshaking Page Beeper Volume Good Read Good Read IndicatorsOutput Beeper Good ReadBeeper Duration Good Read LED Indicator StateLED Good Read Number of Beeps Good ReadUser-Specified Good Read Delay Good Read DelayTrigger Modes Manual/Serial TriggerPresentation Mode Scan Stand ModeScan Stand Symbol Hands Free Time-Out Reread DelayPresentation Sensitivity LED Power Level User-Specified Reread DelayImager Time-Out Aimer Mode Aimer DelayUser-Specified Aimer Delay CenteringTom and Right Decode Window Preferred Symbology Decode Search ModeLow Priority Symbology High Priority SymbologyPreferred Symbology Time-out Preferred Symbology DefaultRequire Output Sequence Output Sequence OverviewOutput Sequence Editor Seqblk Output Sequence ExamplesMultiple Symbols No Read Print WeightVideo Reverse Mandatory Alignment FlagWorking Orientation Prefix/Suffix Overview Data EditingPoints to Keep In Mind To Add a Prefix or Suffix Scan the Add Prefix or Add Suffix symbolTo Clear One or All Prefixes or Suffixes Scan Add SuffixScan the Clear One Prefix or Clear One Suffix symbol To Add a Carriage Return Suffix to all SymbologiesPrefix Selections Suffix SelectionsIntercharacter Delay Intercharacter, Interfunction, and Intermessage DelaysUser Specified Intercharacter Delay Function Code TransmitIntermessage Delay Interfunction DelayPage Data Formatting Scan the Enter Data Format symbol Primary/Alternate FormatData Format Editor Introduction To Add a Data FormatEditor Commands Data Format Editor CommandsOther Programming Selections Clear One Data FormatMove Commands Data Formatter Data Format EditorAlternate Data Formats Alternate Data Format Page MSI SymbologiesCodabar Start/Stop Characters Message Length DescriptionCodabar Check Character Codabar Message Length Codabar ConcatenationCode 39 Check Character Code 39 Start/Stop CharactersCode 39 Append Code 39 Message LengthCode 32 Pharmaceutical Paraf Code 39 Code Full AsciiInterleaved 2 of 5 Message Length Check DigitCode 93 Code Code 93 Message LengthStraight 2 of 5 Industrial Message Length Straight 2 of 5 Iata Message Length Straight 2 of 5 IataMatrix 2 of 5 Message Length Code 11 Message Length Check Digits RequiredIsbt 128 Concatenation Code 128 Code Code 128 Message LengthTelepen Message Length Telepen OutputUPC-A Number System UPC-A Check DigitUPC-A Addenda Required UPC-A AddendaUPC-A Addenda Separator UPC-E0 Addenda Required UPC-E0 ExpandUPC-E0 Addenda Separator UPC-E0 Number System UPC-E0 Check DigitUPC-E0 Addenda EAN/JAN-13 Addenda EAN/JAN-13 Check DigitEAN/JAN-13 Addenda Separator EAN/JAN-13 Addenda RequiredIsbn Translate EAN/JAN-8 Addenda EAN/JAN-8 Check DigitEAN/JAN-8 Addenda Separator EAN/JAN-8 Addenda RequiredMSI Check Character Plessey Message Length MSI Message LengthGS1 DataBar Expanded Message Length PosiCode Message Length PosiCode a and BCodablock F Message Length Code 16K Message Length Code 49 Message Length Minimum Message Length Maximum Message Length Off UPC/EAN Version Eanucc Composite CodesEanucc Composite Code Message Length Eanucc EmulationID-tag UPU 4-State Intelligent Mail BarcodePostnet Postnet Check DigitPlanet Code Check Digit Planet CodeBritish Post Canadian PostAustralian Post Interpretation Australian PostChina Post Japanese PostChina Post Message Length Korea Post Message Length Korea PostData Matrix Message Length QR Code Message LengthAztec Code Message Length MaxiCode Message LengthAztec Runes Page OCR Fonts OCR ProgrammingCurrency Font OCR TemplatesTemplate Characters Creating an OCR TemplateAdding Spaces Stringing Together Multiple Formats Creating Or StatementsReading Multi-Row OCR OCR User-Defined VariablesOCR Modulo 10 Check Character OCR Check CharacterOCR Modulo 36 Check Character OCR User-Defined Check CharacterProgramming a User-Defined Check Character Scan the Enter OCR Check Character barcode, belowWeighted Modulo 10 Check Character Weighting Options0128454 OCR Isbn Application ExampleExit Selections OCR Template CodesKeyboard Function Relationships Interface KeysAscii HEX Supported Interface KeysUtilities Show Data Format Resetting the Standard Product DefaultsTest Menu 2D PQA Print Quality AssessmentVisual Xpress Introduction ConfigureVisual Xpress Operations Scan DataImaging Installing Visual Xpress from the WebHeld Products-Visual Xpress Menu Command Syntax Serial Programming CommandsQuery Commands ConventionsExamples of Query Commands Concatenation of Multiple CommandsResponses Enter cbrena? Response CBRENA1ACK Trigger CommandsEnter cbr? Response CBRENA1ACK CK20ACKSetting Serial Selection Command Menu CommandsTerminal Interfaces KBDNPS1 Output SelectionsBEPBIP0 DECWIN1 Prefix/Suffix Selections SymbologiesCBRCCT0 CBRCCT1 C93DCP TELENA0 TELENA1 UPEAD21 MSICHK0 C49DFT PLNCKX1 OCR Selections Parameter Specification Product SpecificationsPage Serial Output Standard Cable PinoutsPage Maintenance MaintenanceRepairs To Replace the Interface Cable TroubleshootingDocument reader won’t read your barcode at all Page Customer Support Product Service and RepairTechnical Assistance Online Technical AssistanceOnline Product Service and Repair Assistance Limited WarrantyNorth America Page Page Symbology Symbology ChartAppendix a Possible AIM ID Code ID hex Modifiers mOCR-B1 Hex Char Ascii Conversion Chart CodeCode Standard Description Code Page Mapping of Printed BarcodesPage Page Page Sample Symbols QR Code OCR Programming Chart Discard Save Programming Chart Save Discard Honeywell

Related manuals

Manual 2 pages 56.38 Kb