No Read
With No Read turned On, the Document Reader notifies you if a code cannot be read. The document reader outputs an “NR” appears when a code cannot be read. If No Read is turned Off, the “NR” will not appear. Default = Off.
On
* Off
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the output message using the Data Formatter (page
Print Weight
Print Weight is used to adjust the way the document reader reads Matrix symbols. If a document reader will be seeing consistently heavily printed matrix symbols, then a print weight of 6 may improve the read- ing performance. For consistently light printing, a print weight of 2 may help. After scanning the Set Print Weight barcode, set the print weight (from
Set Print Weight
* Default
Video Reverse
Video Reverse is used to allow the document reader to read barcodes that are inverted. The Off bar- code below is an example of this type of barcode. If additional menuing is required, Video Reverse must be disabled to read the menu barcodes and then
Note: Images downloaded from the unit will not be reversed. This is a setting for decoding only.
On
* Off
Mandatory Alignment Flag
The 4800dr can be set to require that the reader tray be aligned properly before an image can be snapped and shipped. This prevents users from capturing images on an unaligned 4800dr, which can result in poor quality images. If the Mandatory Alignment Flag is On, no images will be captured until the
3 - 15