Earthquake Sound PH800W/2, PH1000W/2, PH2200W/4 specifications Specifications, Service Request

WARRANTY

A warranty claim will not be valid if the warranty registration card is not properly filled and returned to Earthquake with a copy of the purchase receipt.

(E)Service Request:

To receive product(s) service, contact Earthquake service department at (510) 732-1000 and request an RMA (Return Material Authorization) number. Items shipped without a valid RMA number will be refused. Make sure you provide us with your complete/correct shipping address (NO P.O. Box), a valid phone number and a brief description of the problem you are experiencing with the product(s). In most cases, our technicians might be able to resolve the problem over the phone, thus eliminating the need to ship the product(s).

(F)Shipping Instructions:

Product(s) must be packaged in its original protective box(es) to minimize transport damage, otherwise a re-packing charge may apply. Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse products that are improperly packed. Copy of original purchase receipt

must accompany product(s) being returned for service. We encourage you to include with the package a written description of the problem.

Ship product to:

Earthquake Sound Corp.

2727 Mc Cone Avenue. Hayward, CA 94545

Phone: (510) 732-1000

You are responsible for the cost of shipping and insurance for the product(s). Please be sure to write the RMA number on every box.

(G) Disputes Resolution:

All disputes - between client(s) and Earthquake Sound Corporation - resulting from the five (5) year limited warranty policy must be resolved according to the laws & regulations of the county of Alameda, California.

NOTE: For warranty guidelines on the PH5000W/D1, PH10000W/D1 and PH20000W/D, please refer to the one provided in the product packaging.

Dimensions (HxWxL)

2.375" x 10.125" x 8.5"

2.375" x 10.125" x 10.375"

2.375" x 10.125" x 13.375"

2.375" x 10.125" x 12"

2.375" x 10.125" x 12"

2.375" x 10.125" x 15"

2.375" x 10.125" x 16.5"

4.5" x 12" x 28.625"

SENSORSIGNAL usetheeliminatetoyouallowsfeaturenewThisof a remote wire to turn on your amplifier. willamplifierthemode,ON”“AUTOinWhen! automatically detect an incoming signal once the stereo is turned on.If

NOTE:CH1/2ininsertedbemustoutputsRCAThefor the amplifier to detect any incoming signal.

NOTE:“AUTOonisamplifierthewhencasessomeIn ON” mode, if your system generates noise through the RCAwire youamplifier,theupwakingthereforeandmay want to switch your amplifier installation to the “REMOTEON” .wire)onturntheuse(mustmode

SPECIFICATIONS

PowerChannelsPowerMaxModelPower PowerPower Weight BridgedOhm-4 1-Ohm 2-Ohm Bridged 4-Ohm Stereo

PH800W/2

PH1000W/2

PH2200W/4

PH2000W/D1

PH2000W/D1.1

PH5000W/D1

PH10000W/D1

PH20000WD

MEASUREMENTSALL*** ARE MADE USING RESISTIVE LOAD *** POWERALL*** RATINGS ARE PEAK POWER ***

withinsignaladetectnotdoesamplifierthe20 minutes, it will automatically shuts down. amplifierthemode,ON”“REMOTEinWhen!relies on the remote wire to detect a signal.

9

11

13.5

13

13

16

18

105x2

145x2

130x4

500x1

450x1

860x1

900x1

3000x2

200x2

250x2

250x4

1000x1

700x1

3000x1

3000x1

20,000x1

N/A

N/A

N/A

N/A

1000 x

5000 x

5000 x

N/A

1

1

1

1 x 400

1 x 500

2 x 500

MONO

MONO

MONO

MONO

6000

800

1000

1400

1400

1400

5000

5000

20000

2

2

4

(MONO)

(MONO)

(MONO)

(MONO)

2

1

1

1

1

4

Please keep this warranty information in your	SERIAL NUMBER
files for future reference if necessary. It is
recommended that you stick your serial number
here for future reference.

Specifications Are Subject To Change Without Notice

5

www.earthquakesound.com