Compaq 6500 manual LCD Troubleshooting

Troubleshooting

LCD Troubleshooting

Problem Possible Cause Action

Power is on, but there is no LCD display.

Notebook computer	Press any key to resume operation.
Standby Timer expired.
Notebook computer	Press a key on the keyboard or move your finger
Video Timer expired.	across the touch pad.
Notebook computer	Press the [Suspend/Power] button to resume
Auto Suspend Timer	operation.
expired.

Notebook computer	Press [fn] + [F4] until the LCD display is active.
running in CRT mode.
Screen saver utility	Press a keyboard key or click on the touch pad.
installed.
System in locked state.	Press the Reset Button located on the rear of the
	notebook computer (Figure 2-3), then restart the
	system.
LCD failure.	Contact your Compaq support representative.

________________________WARNING___________________________

High voltages exist inside the Liquid Crystal Display (LCD) enclosure (notebook computer’s screen display). To prevent electrical shock, do not open the LCD enclosure. If the LCD needs repair, return it to your Compaq service representative.

____________________________________________________________

6-6