Compaq 6500 manual Audio and IR Troubleshooting

Page 69

 

 

 

Troubleshooting

Audio and IR Troubleshooting

 

 

 

 

 

 

 

 

Problem

Possible Cause

Action

 

 

 

 

 

 

Sound is not

Audio volume needs to

Adjust audio volume by pressing the

 

working.

be increased.

[fn]+[s] hot key combination.

 

 

System audio has been

Check the sound icon located on the

 

 

turned off.

Windows Taskbar. If sound is

 

 

 

disabled/muted, press [fn] + [F7] to toggle

 

 

 

on the internal audio feature.

 

Configuration problem.

File does not

FIR port is disabled.

transfer.

 

 

Obstructed transmission

 

path.

 

Your FIR port is located

 

too far from and out of

 

plane with the other

 

device’s Infrared

 

module.

 

Transmission subjected

 

to excessive noise levels.

From the Windows Control Panel double- click the System icon and verify the sound device is properly configured and the drivers are loaded.

Press [fn] + [F3] to enter the System Setup and enable the Infra-Red Port. Refer to Chapter 4 if you require additional information about System Setup.

Ensure that there is a clear, unobstructed path between the two Infrared modules.

Position your notebook closer to the other device’s Infrared transceiver. For best results, keep transmission distances less than or equal to 1 meter and a bias angle of less than 15 degrees.

Do not transmit Infrared signals near equipment with compressors, such as refrigerators or air conditioners.

6-9

Image 69
Contents Compaq Armada 6500 Family Reference Guide June Table of Contents System Software & Restoration Configuring Your NotebookTroubleshooting Memory UpgradesAcronyms Meaning AcronymsVii Special NoticesViii Quick Setup Guide Documentation KitReference Guide Documentation Kit Html On-line HelpRelated Documentation Compaq Web Sites Getting to Know Your Computer FeaturesComponents, Controls, and Indicators Front and Right Side ComponentsComponent Description Front and Right Side View Front and Left Side Components Front and Left Side View Back View Back ComponentsBottom View Bottom ComponentsGoalAction Controlling PowerTouch pad Using the Touch padTouch Pad On-line Help Plugging In and Turning OnConnecting the Universal AC Adapter Turning on the Notebook Computer Preparing the Battery for Use Using the BatteryReplacing the Battery Battery Removal and Installation8a Removing Battery 8b Removing Battery 9a Installing the Battery Installing the Battery9b Installing the Battery Using Your Modem Country Select UtilityUser Responsibility More Information How to Use Country SelectSystem Software & Restoration Installing Optional SoftwareInstalling Documentation and Applications Application DescriptionSoftware Title Software Description Make Boot Diskettes UtilitiesUtilities Utility Description Using AMI Diagnostics on CD AMI DiagnosticsSystem Software & Restoration Using AMI Diagnostics on Diskette QuickRestore Preparation Using the Compaq QuickRestore CDQuickRestore Procedures System Software & Restoration System Software & Restoration Configuring Your Notebook Running System SetupSystem Setup Utility Menu Configurable Features Updating Your Notebook Computers ConfigurationHelpful Hints Launching SubmenusAlternate Key Function Main Menu Feature Settings Comments\O Device Configuration Submenu Field Settings CommentsAdvanced Menu EPP Enhanced Security Menu Setting/Changing a Supervisor Password Setting/Changing a User Password Deleting a Supervisor or User Password Password on Undock Power MenuFeatureSettingsComments Boot Menu Exit Menu Feature Action CommentsMemory Upgrades Removing Memory Compartment Cover Installing Additional MemoryInstalling Memory Removing Memory Removing MemoryCompaq Web Site TroubleshootingProblem Possible Cause Action TroubleshootingRequested partition does Troubleshooting Software or hardware LCD Troubleshooting PC Card Troubleshooting Troubleshooting Audio and IR Troubleshooting Troubleshooting Technical Specifications GTX6300MD System SpecificationsFeature Specification Environment Technical SpecificationsPreparing for a Technical Support Call Compaq Customer SupportWorldwide Telephone Numbers Worldwide Telephone NumbersLocation Country Code Telephone Number Worldwide Telephone Numbers Country Location Code Worldwide Telephone Numbers Location Country Code Israel IndiaItaly JapanNew Zealand NetherlandsNorway PolandSwitzerland SwedenTaiwan ThailandVenezuela Worldwide Telephone NumbersRegulatory Agency Series Numbers Regulatory NoticesFederal Communications Commission Notice ModificationsCables Canadian Notice Avis CanadienEuropean Notice Japanese Notice German Ergonomics Notice Airline Travel NoticeEnergy Star Compliance Battery Notice Power CordsBattery Recycling and Disposal Cdrh Regulations Laser SafetyLaser Information Modem Notices FCC Regulations PartFCC Rules and Regulations Part Industry Canada IC Notice Canadian Department Of CommunicationsSafety Notices Power Requirements Package ContentsBritish Approvals Board for Telecommunications Babt Statutory NoticesSuitability for Use Hook Flash Ringer Equivalence Number RENGuard Tone Speaker ControlPulse Dialing TimingRepeat Attempts Bell Noise Use as an Extension on an Approved PabxIdentification of Ports Additional FeaturesDialing Modes Available FacilitiesInternational Notice To the customerTo Telephone Sales Modem Approvals Telecom Network ApprovalsArea Country Approval Number Europe Pacific AsiaRegulatory Notices Index Index-2 IndexIndex-3 Index-4

6500 specifications

The Compaq 6500, a significant entry in the realm of computing, emerged in the mid-1990s as a part of the Compaq Presario series. This desktop computer was designed to meet the demands of both home and small business users, offering a reliable and powerful solution for various computing needs.

One of the standout features of the Compaq 6500 was its robust performance. It was equipped with Intel's Pentium processors, which provided significant processing power for the time. Users could choose between different configurations, which made the 6500 versatile for tasks ranging from basic word processing to more demanding applications like graphic design and multimedia.

In terms of memory, the Compaq 6500 supported significant RAM upgrades, accommodating up to 64 MB of DDR RAM, which enhanced its multitasking capabilities. This was particularly useful for users who ran multiple applications simultaneously. The system also offered an array of storage options, featuring hard drives with capacities that ranged from 1 GB to 8 GB, allowing for ample space for documents, images, and software.

The Compaq 6500 showcased advanced technologies for its era, including support for Plug and Play devices, which simplified peripheral connections. This feature allowed users to easily add and remove devices like printers, scanners, and modems without extensive configuration, streamlining the user experience.

Another crucial characteristic was its graphics capabilities. The desktop came with integrated graphics technology, allowing for decent video output and enabling users to enjoy multimedia content. For more demanding users, the system could be equipped with dedicated graphics cards, enhancing its performance in gaming and graphics rendering.

In terms of connectivity, the Compaq 6500 was equipped with various ports, including serial and parallel ports, and later models introduced USB support, paving the way for a broader range of peripherals and external devices.

The design of the Compaq 6500 also deserves mention; it featured a compact and functional chassis that was relatively easy to access, allowing users to upgrade components as needed. Its attractively sleek design made it a fitting choice for both home environments and office settings.

Overall, the Compaq 6500 was a well-rounded desktop computer that balanced performance, usability, and upgradeability, making it a notable choice during its time. It exemplified Compaq's commitment to delivering reliable technology to consumers, solidifying its place in the annals of computing history.