| Troubleshooting |
| Symptom Charts/Hard Drive - 18 |
Drive does not appear | 1 | Verify there are no duplicate SCSI device addresses. | |
on the desktop | 2 | Update the SCSI device driver using Drive Setup and then run | |
|
|
| Drive Setup Updater utility program. Run Disk First Aid to |
|
| 3 | verify the condition of the drive's directory structure. |
|
| Replace the SCSI hard drive cable. | |
|
| 4 | If drive is not initialized, use Drive Setup to initialize it and |
|
| 5 | then run Drive Setup Updater utility program. |
|
| Replace with | |
|
| 6 | If the hard drive still doesn't work, switch back to the |
|
|
| original hard drive and replace the logic board. |
Works with internal | 1 | Verify there are no duplicate SCSI device addresses. | |
or external SCSI | 2 | Replace terminator on external SCSI device. | |
devices but not with | 3 | Verify that SCSI device at end of internal SCSI data cable is | |
both | 4 | only device terminated. | |
|
| Refer to appropriate manual to troubleshoot defective | |
|
|
| external device. |