| Troubleshooting |
| Symptom Charts/Error Chords - 5 |
1 | Make sure DRAM is installed first in banks A6 and B6, | ||
chord (death chimes) |
| followed by banks A5 and B5, etc. Do not install DRAM in | |
sounds during | 2 | banks A1 and B1 until all other banks are full. | |
startup sequence | Replace DRAM DIMMs one at a time to test DRAM. Replace | ||
|
| 3 | any faulty DIMMs. |
|
| Replace logic board. Note: When you replace the logic board, | |
|
|
| be sure the LED cable is not interfering with the power |
|
|
| actuator. |