Acer M5810 manual Miscellaneous

	Message	Description
	Displayed
	CMOS	CMOS settings are invalid. This error can be resolved by using AMIBIOS Setup.
	Settings
	Wrong
	CMOS	CMOS contents failed the Checksum check. Indicates that the CMOS data has been
	Checksum	changed by a program other than the BIOS or that the CMOS is not retaining its data due to
	Bad	malfunction. This error can typically be resolved by using AMIBIOS Setup.
Miscellaneous
	Message	Description
	Displayed
	KBC BAT Test	Keyboard controller BAT test failed. This may indicate a problem with keyboard controller
	failed	initialization.
	Keyboard	Keyboard is not present or the hardware is not responding when the keyboard controller is
	Error	initialized.
	PS2 Keyboard	PS2 Keyboard support is enabled in the BIOS setup but the device is not detected.
	not found
	PS2 Mouse	PS2 Mouse support is enabled in the BIOS setup but the device is not detected.
	not found
	Keyboard/	Keyboard Controller failure. This may indicate a problem with system hardware.
	Interface Error
	Unlock	PS2 keyboard is locked. User needs to unlock the keyboard to continue the BIOS POST.
	Keyboard
	System Halted	The system has been halted. A reset or power cycle is required to reboot the machine. This
		message appears after a fatal error has been detected.
	<INS>	Indicates that <INS> key is pressed during the BIOS POST. The POST will load and use
	Pressed	default CMOS settings.
	Password
	check failed
		The password entered does not match the password set in the setup. This condition may
		occur for both Supervisor and User password verification.
	Unknown	This message is displayed when ADM module is not present in the AMIBIOS8 ROM.
	BIOS error.
	Error code =
	004Ah
	Unknown	This message is displayed when language module is not present in the AMIBIOS8 ROM.
	BIOS error.
	Error code =
	004Bh
	Floppy	Error in initializing legacy Floppy Controller.
	Controller
	Failure

51 Chapter 4