Acer M5810 manual

Page 95

Step 7:Select two HDDs as "Source Hard Drive".

Picture15

Step 8:At least select two HDD as Menber Hard Drive(s). Step 9:Specify Volume Size then press "next".

Step 10:Press "next" to finish setup and start create RAID 10.

Step 11:It may takes half and hours to create RAID 10.After create completely,it will ask to reboot to finish create RAID10.

2-5:Create a“RAID Ready” System into" RAID 0" with two Hard Drives by ‘Create RAID Volume ’.

Step 1:Install WIN7 OS with one SATA HDD.

Step 2:Shut down the system,then add another two serial ATA hard drives in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console.

Step 4:Click on the by‘Create RAID Volume’ to create a RAID volume.

Picture16

Chapter 7

88

Image 95
Contents Acer Aspire M5810 Service Guide Revision History Copyright Disclaimer Conventions Service Guide Coverage Table of Contents Chapter FeaturesAudio Optical diskGraphics card support Serial ATA controllerTotal I/O ports System BiosPower supply Label Description PlacementIntel Processor Block DiagramComponent System ComponentsFront Panel Rear Panel Power Management FunctionACPI support function System Utilities Cmos Setup UtilityNavigating Through the Setup Utility Entering Cmos setupParameter Description Setup Utility MenusProduct Information Parameter Description Option Standard Cmos FeaturesEnabled Advanced Bios FeatureAuto Advanced Chipset FeaturesIntegrated Peripherals Power Management Setup PC Health Status Frequency/Voltage Control Setting a supervisor password Bios Security FeaturesLoad Default Settings Save & Exit Setup Exit Without Saving Disassembly Requirements System DisassemblyPre-disassembly Procedure Removing the Side Panel Removing the Heat Sink Fan Assembly Removing the Processor Removing the VGA Card Removing the TV Card Removing the Mode CardRemoving the Hard Disk Drive Page Removing the Front Bezel Removing the Optical Drive Remove Cables Remove System FAN Removing the Power Supply Removing the Memory Modules Removing the Mainboard System Troubleshooting Checkpoint Description Power-On Self-Test PostBootblock Recovery Code Checkpoints Early CPU Init Start -- Disable Cache ?C Init Local Apic Extended Bios Data Area from base memory DIM Code Checkpoints Message Description Displayed Post Error Messages ListStorage Device Atapi Description Displayed Virus RelatedCmos Miscellaneous Message Displayed Description USB eModule Error MessagesDiskette Drive Error Symptoms ListError Symptom Action/FRU Processor / Processor Fan Main board and MemoryCD/DVD-ROM Drive Error Symptom Action/FRUHard Disk Drive Video and Monitor Real-time clockAudio ModemKeyboard Power SupplyOther Problems Undetermined Problems System Board Header Setting Jumper SettingSetting Jumper System Board Jumper SettingFront USB Front Audio HDA Chapter Sata Connector Pin FAN Header Clear Cmos Header Clrsrtc Intr AUX-IN FRU Field Replaceable Unit List Aspire M5810 Exploded Diagram Name Type ’TY Category Description Part Number Aspire M5810 FRU ListHD4870 1GB DDR 5 256BITS Hynix 6 Layer Dual DVI NEW Keyboard Chapter Category Description Part Number Chapter Category Description Part Number Chapter Create Sata RAID Intel RAID SOPChapter Create Sata RAID Create Sata RAID 0+1 Page Intel RAID SOP Windows for WIN7 Page Picture6 Select Menber Hard Drives Picture7 Page Chapter Page Chapter Page Chapter