Epson EPIX Loading the Epix Driver Software, Hardware Setup and Connections, Usb, Cable Power

Page 14

4.3. LOADING THE EPIX DRIVER SOFTWARE

Do not plug in or turn on the EPIX scanner before installing the Logos Imaging software. The EPIX system drivers are loaded automatically during Logos Software installation.

WARNING: THE EPIX SYSTEM MUST NOT BE INSTALLED ON THE NETWORK SERVER

4.4. HARDWARE SETUP AND CONNECTIONS

Before you start the hardware setup, ensure that you have an acceptable computer as outlined in Section 3.4. The computer must have a USB port available.

Step 1: Pick a location using the guidelines from 4.1.

Step 2: Set up the computer and monitor per the manufacturer’s recommendations. Use an ergonomic setup to minimize repetitive motion injuries.

Step 3: Turn the power on to the monitor and computer.

Step 4: Connect the device end of the USB cable to the USB connector on the back of the EPIX SCANNER. Connect the scanner to a grounded power outlet. Make sure the other end of the USB cable is connected to the USB port on the computer.

USB

Cable

Power

Cable

Fig. 4-7

Step 5: Connect the computer to a network if desired. Refer to your Imaging Software User Manual and Installation Guide for more information.

Step 6: Turn the power on to the scanner. The green light on the scanner should be lit at this time. If it is not, follow the trouble shooting guidelines in Section 7.3.

Logos Imaging EPIX Scanner

13

User Manual

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents EPIXScanner USB Technical Support Supplies and Replacement PartsEpix Digital Imaging System by Logos Imaging Table of Contents USE Epix Scanner is not intended for medical imaging of humansSafety Requirements Important InformationDo not leave unscanned, exposed imaging plates in light Purpose of the Manual PRE-INSTALLATION Information RecommendationsAbbreviations and Explanation of Symbols Customer Supplied Components Physical DescriptionQuantity Description Optional Equipment from Logos ImagingEpix Scanner Laser Scanner Scanner Front ViewLogos Imaging Epix Scanner Electrical Requirements Computer RequirementsMinimum Computer Requirements Recommended Compliance to StandardsInstallation Site SelectionUnpacking the Unit Loading the Epix Driver Software Hardware Setup and ConnectionsCable Power USBErase the Imaging Plate System Operating InstructionsPreparing Your Current X-RAY Equipment Taking AN X-RAY 10 in shown. FigScanning the Imaging Plate Turning OFF the Epix SystemSoftware Operating Instructions Cleaning the Scanner Maintenance ProceduresCleaning the System Cleaning Imaging PlatesCarousel Maintenance Operator MaintenanceScanner Maintenance Imaging Plate MaintenanceTroubleshooting Trouble Probable Cause Corrective ActionQuickly, which resulted in a Comments Disposal of Waste Materials and Inoperartive PartsMaterial Items Shipment Storage and ShipmentStorage Epix Scanner Technical SpecificationsSpecifications Epix Imaging PlatesWarranty Statement Appendix a Storage Phosphor Technology How Storage Phosphor Imaging Plates WorkIncandescent Lighting SunlightPractical Test Dye Sublimation printers Appendix C Optional PrinterInkjet printers Application softwareAppendix D Warranty Registration Please return this registration to
Top Page Image Contents