CAUTION STATEMENTS
Completely erase the imaging plates. Before reusing an imaging plate, lay it blue or white surface up facing a bright light source for two (2) minutes as described in Section 5.2.
Mount the imaging plates under low light conditions.
Mount the imaging plates to the carousel under low light cond itions as described in Section 5.4. Exposure to direct sunlight or direct indoor lighting will erase the information stored on the imaging plate.
Do not place scanner on or next to a radiator or water source.
Excessive heat or small amounts of water may damage the scanner’s electrical components.
Do not leave unscanned, exposed imaging plates in light.
Leaving unscanned, exposed imaging plates in light will cause loss of image quality.
Do not scratch the imaging plates When handling the imaging plate, do not touch the active side (blue or white) with fingernails or any sharp object that might scratch the surface. Do not lay unprotected imaging plates face down.
Logos Imaging EPIX Scanner | 5 |
User Manual |
|