Epson EPIX manual Operator Maintenance, Scanner Maintenance, Carousel Maintenance

Page 20

7.2. OPERATOR MAINTENANCE

Scanner Maintenance

The only operator serviceable part of the EPIX SCANNER is the fuse. If you experience any other maintenance problem, contact your local Logos Imaging dealer. Follow these directions to change the fuse.

Fig. 7-2

Turn the EPIX SCANNER off as per Section 5.5. Unplug the power cord and USB cable.

WARNING: To avoid possible electrical shock, ensure that the power cord is unplugged.

Fig. 7-3

Insert a small, flat tipped screwdriver into the top of the fuse cover on the back of the scanner. Pry the top of the connector open.

Fig. 7-4

Remove the fuse holder. Change both fuses. Ensure that new fuses meet the following specifications: 250 V, 2 amp, Time Lag, High Breaking Capacity. Insert the fuses, REF 5101-0005, into the fuse holder.

Fig. 7-5

Insert the fuse holder and close the cover. Plug the power cord back in and turn the system on as outlined in Section 5.5

Carousel Maintenance

The carousel from the EPIX SCANNER can be maintained by the operator.

Imaging Plate Maintenance

The EPIX SCANNER imaging plates have no operator serviceable parts.

The EPIX SCANNER Digital System might occasionally require lubrication. Please refer to the EPIX SCANNER service manual or your service technician.

Logos Imaging EPIX Scanner	19
User Manual

Image 20

Contents EPIXScanner USB Technical Support Supplies and Replacement PartsEpix Digital Imaging System by Logos Imaging Table of Contents USE Epix Scanner is not intended for medical imaging of humansSafety Requirements Important InformationDo not leave unscanned, exposed imaging plates in light Purpose of the Manual PRE-INSTALLATION Information RecommendationsAbbreviations and Explanation of Symbols Physical Description Quantity DescriptionCustomer Supplied Components Optional Equipment from Logos ImagingEpix Scanner Laser Scanner Scanner Front ViewLogos Imaging Epix Scanner Computer Requirements Minimum Computer Requirements RecommendedElectrical Requirements Compliance to StandardsInstallation Site SelectionUnpacking the Unit Hardware Setup and Connections Cable PowerLoading the Epix Driver Software USBErase the Imaging Plate System Operating InstructionsPreparing Your Current X-RAY Equipment Taking AN X-RAY 10 in shown. FigScanning the Imaging Plate Turning OFF the Epix SystemSoftware Operating Instructions Maintenance Procedures Cleaning the SystemCleaning the Scanner Cleaning Imaging PlatesOperator Maintenance Scanner MaintenanceCarousel Maintenance Imaging Plate MaintenanceTroubleshooting Trouble Probable Cause Corrective ActionQuickly, which resulted in a Comments Disposal of Waste Materials and Inoperartive PartsMaterial Items Shipment Storage and ShipmentStorage Technical Specifications SpecificationsEpix Scanner Epix Imaging PlatesWarranty Statement Appendix a Storage Phosphor Technology How Storage Phosphor Imaging Plates WorkIncandescent Lighting SunlightPractical Test Appendix C Optional Printer Inkjet printersDye Sublimation printers Application softwareAppendix D Warranty Registration Please return this registration to