Reserved Codes
Metrologic has reserved the codes on the following pages for features that will be added at a later date. Do not assign a function for any of the reserved codes.
These former reserved codes have been assigned functions by Metrologic.
Code | Page # | Assigned Function |
R24 | 17 | Enable Keyboard Wedge Interface |
R27 | 47 | Enable Bancomer Mode |
R29 | 46 | Golden Bountiful Formatting |
R33 | 37 | Disable Code 39 Start/Stop Character Transmit |
R68 | 20 | Enable AutoDetection Caps Lock Mode |
R69 | 20 | ** Disable AutoDetection Caps Lock Mode |
R70 | 34 | Enable “$” Prefix ID for UPC/EAN |
R71 | 34 | ** Disable “$” Prefix ID for UPC/EAN |
R74 | 37 | Enable Code 39 Start/Stop Character Transmit |
R75 | 30 | Enable Telepen |
R76 | 30 | ** Disable Telepen |
R77 | 30, 43 | Enable UK Plessey |
R78 | 30, 43 | ** Disable UK Plessey |
R79 | 43 | Enable UK Plessey Special Format |
R80 | 43 | ** Disable UK Plessey Special Format |
R81 | 43 | Transmit UK Plessey Check Digit |
R82 | 43 | ** Do Not Transmit UK Plessey Check Digit |
R86 | 6 | Enable 2X redundancy (MECCA) |
R87 | 6 | Disable 2X redundancy (MECCA) |
R92 | 5 | Enable 2 Scan Buffers |
R93 | 5 | **Enable 1 Scan Buffer |
R94 | 13 | Enable “DE” Disable Command |
R95 | 13 | *Disable “DE” Disable Command |
R98 | 47 | Disable Bancomer Mode |
R99 | 14 | Disable LRC Transmit Via RS232 |
RA0 | 14 | Enable LRC Transmit Via RS232 |
RA1 | 46 | Enable Intermec Polling Mode D |
|
| (Limited Function) |
RA2 | 46 | Disable Polling Mode D |
RA3 | 35 | Enable Coupon Code 128 |
RA4 | 35 | Disable Coupon Code 128 |
RA5 | 36 | Enable ] C1 Transmit Coupon C128 |
RA6 | 36 | Disable ] C1 Transmit Coupon C128 |
RA9 | 46 | Enable Dayton Hudson RS232 |
57