Canon FB630U, FB636U manual Verify Image Before Scanning, To Verify the Image

Page 31

S T E P 2

Verify Image Before Scanning

Before initiating the final scan, it is advisable to check the intended results with the Browser function. The image in the Browser window is more accurate than the one in the Preview window, allowing you to verify the results more precisely before scanning.

To Verify the Image

Set the magnification and scan mode to the appropriate settings (pp. 26-30). Click on the [Browser] button.

•The Selection Frame will appear on the Preview window to enable a portion of the image to be selected.

•The size and shape of the Selection Frame cannot be changed because it is automatically determined by the scanning resolution setting.

Hint

The Browser button is disabled when the image area is unspecified or is too small (less than approximately 64 x 64 pixels).

Move the pointer in the selection frame inside the preview window.

• The mouse cursor will change to a “+” sign shape.

Move the Selection Frame to the desired position with the mouse cursor.

• Moving the mouse will move the Selection Frame.

31

Image 31

Contents Users Guide Getting Started How to Make Best Use of the ManualsWhere to Look How to Use this GuideAbout the Conventions Used in this Guide Table of Contents Appendices Adjusting and Editing Scanned ImagesControl Panel Features Scanning Preparations p Scanning ProceduresAdjusting and Editing Scanned Images E PSupports ColorSync 2.0 or higher Auto Tone Correction Plug-in Module CS-U Special FeaturesSee the Results of Adjustments Immediately Dynamic Preview Gamma Curve Adjusts Image BrightnessStart the Preview Scan Installing Plug-in Module CS-UQuick Start Instructions Start Plug-in Module CS-USelect the area to be scanned by clicking and dragging Set the preferences, magnification and scan mode settingsSpecify the Area of the Image to be Scanned p Click on the Browser buttonFolder, file name and file format Scan the Image pClick on the Scan button Save the image with the application software, specifying aE P E P Installing Plug-in Module CS-UOperating Environment Click the Install the Software button E P ProceduresClick the Yes button to start the installation E P E P Scanning Preparations Buttons Display Plug-in Module CS-U Control PanelAdobe PhotoDeluxe E P Operating ProceduresAdobe Photoshop Set the original on the scanner document glass PreviewingClick on the Preview button Unit Set PreferencesE P Setting Basic Resolution E P Preview Window Size Preview Window Settings Dialog BoxSelect the desired option from the pull-down menu Return to Default SettingsE P Calibration Select the Prefs menu in the control panelSet Magnification Output Device Resolution= 360 dpi, Magnification= 100%Set the desired magnification factor on the control panel E P To Set the Magnification FactorGrayscale Mode 8-bit Set Scan ModeBlack and White Mode Line Black and White Mode Diffusion DitherHigh Definition Color Color Mode 24-bitSelect the scan mode that you want To Set the Scan ModeTo Verify the Image Verify Image Before ScanningE P Scanning Position the pointer in the preview window Scan Area SettingsTo Zoom ZoomingSelect the area you want to enlarge with the zoom function To return to normal view, click the Zoom Out button Click on the Zoom In buttonTo Initiate the Scan ScanningSpecify the Scan Area To Save an Image Saving Scanned ImagesDiffusion Dither Color ModeGrayscale Mode Black & White ModeHow to Interpret Histograms Using the Histogram Feature to Adjust Image ContrastHow to Adjust Histograms Click on the OK button E P To Adjust a HistogramClick on the Histogram button Click the Auto buttonSetting the Gamma Adjusting the Image with Gamma SettingsGamma Gamma =Contrast Brightness and Contrast SettingsBrightness Click the gamma button E P To Adjust the Brightness and ContrastClick the OK button CRT Type C Adjusting Gamma with the MenuCRT Type a CRT Type BClick the radio button for Menu Setting E P To Change the Gamma Value SettingsAdjusting the Gamma Value to Match the Display Gamma Value SettingsSending Output to a Printer Slider Manipulating the Graph Tone Curve SettingsE P To Edit the Tone Curve To Activate the ColorSync Function Auto Tone Correction ColorSyncDescreen ProcedureOpen the Image menu and select Descreen Set the threshold value in the Control Panel To Set the Threshold ValueTo Save Settings in a Settings File Saving / Recalling SettingsE P To Recall a Settings File Many special effects may be achieved with filters Editing Scanned ImagesOptical and Enhanced Resolutions Matching Scan Resolution to PurposeScanning Techniques Functional Specifications SpecificationsSystem Requirements Problem TroubleshootingClicked on the Plug-in Module CS-U control panel Scan button cannot be selected Response Error MessagesError Message CauseGlossary Scanner ResolutionImage File PreviewIndex P E N D I C E S Helpdesk Canon Customer Support Help DeskOE-030AA 0799 CDS Canon Inc