Where To Go From Here
Programming is easy and straightforward if you follow these steps:
1.If you are changing interfaces, first connect the scanner to the new host using the new interface cable. Scan the interface enable bar code label1 .
2.Scan any feature labels that are unique to the interface you are currently programming. These interface specific programming labels immedi- ately follow each interface selection label.
3.Turn to the Symbology section if you are going to change any bar code symbologies or modify any symbology related features.
4.Turn to the General Features section of this guide if you wish to change or modify any of the scanner's other features.
Once the necessary changes have been made, and you have scanned the END label, you are ready to scan.
1This step is not necessary for QuickScan 6000 Plus scanners, unless you require a specific interface
8 | QuickScan 6000/6000 Plus |