Code 39 (continued)
Follow these steps to set Code 39 Minimum Label Length:
1. Identify the minimum length setting you want to make. The selectable range is 00 to 48 * characters.
2. Scan the SET label.
3. Scan the SET CODE 39 MINIMUM LABEL LENGTH bar code.
Setting Lengths
If you are setting a length less than ten, you must scan a zero first and then the length digit ( 04, 06, 08).
4. Set the minimum label length by scanning the correct digits from below and the next page.
5. Scan the END label.
SET ----------------------------------------------
CODE 39 MINIMUM LABEL LENGTH
SET MINIMUM LABEL LENGTH
0
1
2
3
4
* The IBM POS Interface is limited to 32 character labels.
60 | QuickScan 6000/6000 Plus |