Intercharacter Delay
Intercharacter Delay refers to the pause, if any, between each character before it is sent to the host. This time delay is used to control the flow of data from the scanner, but it should not be required for most applications. Use these labels to select the desired Intercharacter Delay.
SET
INTERCHARACTER DELAY
=NONE
=10 MILLISECONDS
=20 MILLISECONDS
=30 MILLISECONDS
=40 MILLISECONDS
=50 MILLISECONDS
=60 MILLISECONDS
=70 MILLISECONDS
=80 MILLISECONDS
22 | QuickScan 6000/6000 Plus |