Clevo D900F manual Disassembly, Removing the Hard Disk Drive 2, HDD Assembly Removal

and connector cable 20 .

9 from hard disk assembly.

d.

Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" SATA hard disk drives with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary driv- ers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.

Hard Disk Upgrade Process

1.Turn off the computer, and turn it over and remove the battery (page 2 - 5).

2.Locate the hard disk bay cover and remove screws 1 - 4 .

3.Remove the bay cover 5 .

4. Remove screws 6 - 8 and pull the tab to release the cable

5.Lift the hard disk assembly 10 out of the computer.

6.Remove screws 11 - 18 .

7. Separate the hard disk(s) 21 from the bracket 19

8. Reverse the process to install a new hard disk(s).

a.c.

		9		13	15
				14
1	3	7	12	19	16
2	4
		6		11
				18
b.		8		17
				21	20

9

10

5

Disassembly

Figure 3

HDD Assembly

Removal

a. Remove the screws. b. Remove the cover

c. Release the cable and lift the hard disk assembly up out off the computer.

d. Remove the screws and separate the HDD(s) from the bracket and connector.



5.Hard Disk Bay Cover

10.Hard Disk Assembly

19.HDD Braket

21.HDD

• 15 Screws

2.Disassembly

Removing the Hard Disk Drive 2 - 7