2.If, after a few seconds, the disc does not automatically start playing, press the Play/Pause ® button on the keyboard.
3.Perform the following tasks using your Internet keyboard as needed:
➜Click the Pause à button to pause play.
➜Click the Forward ¨ and Back ´ buttons to skip tracks.
➜Click the Stop ± button to stop playing the CD.
➜Press the Eject button on the drive to remove the disc.
Playing an Audio CD (3200 Series)
1. Press the Load/
Eject button to open the drive door.
Place the disc into the round area of
the slot, label side
facing upward for desktop
configuration. Hold the disc with label facing outward for the upright position. If the tray contains support tabs, carefully slide the disc under the tabs to correctly position it in the tray.
2.Press Load/Eject button to close the drive door.
3.If, after a few seconds, the disc does not automatically start playing, press the Play/Pause button on the keyboard.
4.Perform the following tasks using your Internet keyboard as needed:
➜Click the Pause button to pause play.
➜Click the Forward and Back buttons to skip tracks.
➜Click the Stop button to stop playing the CD.
➜Press the Eject button on the drive to remove the disc.
MY | USING YOUR COMPUTER |