Calibrating Your Battery
To get the longest running time from your PowerBook battery, complete the following steps during the first week you have your PowerBook.
To initially calibrate your battery, follow these steps:
1Plug in the power adapter and fully charge your PowerBook battery until the light on the power adapter plug changes to green and the onscreen meter in the menu bar indicates that the battery is fully charged.
2Disconnect the power adapter and operate your PowerBook solely off of the battery.
When the battery gets low, you will see the first
3Connect the power adapter and leave it connected until the battery is fully charged again.
Important: You only have to fully discharge and then charge your battery once to calibrate it. After that, you can connect and disconnect the power adapter when the battery is at any charge level.
If you purchased additional batteries, repeat the calibration procedure with the additional batteries as well. For more information about your power adapter and battery, see “Using Your Power Adapter” on page 23 and “Battery” on page 51.
What’s Next?
ÂLearn the important basics about your PowerBook. Check out Chapter 2, “The Basics,” on page 21.
ÂHave fun trying out your computer’s applications and Internet features. Browse the Mac OS X and applications booklet that came with your computer.
ÂIf you’re unfamiliar with Mac OS X, open Mac OS Help and browse the information.
ÂSwitching from another computer? Open Mac OS Help and see the New Users section. It will help you use your previous computer knowledge to get started on a Mac.
Chapter 1 Getting Started
19