Ampro Corporation PCI-104 quick start Chapter

Page 23

Chapter 2

Installing CoreModule 800 Options

There are directories and subdirectories under these topics that should provide you with the needed manuals, utilities, and tools not explained earlier.

4.Install any special OS drivers not found on the manufacturer’s diskette(s) or CD-ROM.

Refer to the directories and subdirectories on the CoreModule 800 Doc & SW CD-ROM for instructions when installing the drivers for the desired OS.

If the desired drivers can not be found, contact Ampro through the Virtual Technician on the web site with a request for the driver(s). Refer to the Appendix A, Technical Support for more information.

5.Install any utilities or other development tools you may need from the CoreModule 800 Doc & SW CD-ROM.

Refer to the directories on the CoreModule 800 Doc & SW CD-ROM for instructions on installing and using the utilities or development tools for the desired OS.

CoreModule 800

QuickStart Guide

19

Image 23
Contents CoreModule PCI-104 Single Board Computer QuickStart Guide Audience Assumptions Contents Table A-1 CD-ROM Setting Up the CoreModuleRequirements What’s in the BoxPreparation Setting Up the WorkspaceCoreModule 800 Connector Locations Connecting Cables to the CoreModuleSkip any steps that do not apply to your situation Refer to the CoreModule 800 I/O Interface Design Library on Cable Connecting Boot Devices Connecting PeripheralsApplying Power to the CoreModule Connecting the Power SupplyMain Advanced PCIPnP Boot Boot Device Priority Default Jumper # Installed Removed/EnabledGND Wire Color Four Pin # Ten Pin # SignalQuickStart Guide CoreModule Removing the Sodimm Installing CoreModule 800 OptionsInstallation Guidelines Tools RequiredDDR Sodimm Removing Sodimm from Socket Installing the SodimmRetaining Latches Angle KeyHidden Pressing down on Sodimm Installing Software, Drivers, and Utilities Chapter QuickStart Guide CoreModule Method Contact Information Appendix a Technical SupportAppendix a Interface Board Layout Appendix B Interface BoardSignal Pin # On Description Board Interface Board ConnectorsDTR1 RTS1TXD1 CTS1Signal OnBoard Description Pin # BSY PD7ACK DS1Figure B-2. RS-485 Serial Port Implementation Signal From Description Pin # Onboard ConnectorSignal From Description Pin # Onboard DB9 Connector Signal From Onboard Description Pin # Connector & Pin # Msclk J10 Signal From Onboard Description Pin # Connector & Pin #Msdat Pin # Signal Description Init BusySlct ALFComponent Description Miscellaneous ComponentsConnector Pin Number Manufacturer Manufacturer’s PN Appendix C Connector Part NumbersConnector Pin Number Mfg Manufacturer’s PN Appendix C