Ampro Corporation PCI-104 quick start Skip any steps that do not apply to your situation

Chapter 1	Setting Up the CoreModule 800
	Skip any steps that do not apply to your situation.
1) Connect Utility 1 &	• Connect Utility 1 cable to J4 on the CoreModule 800 as shown in Figure 1-3.
2 Cables	• Connect Utility 2 cable to J5 on the CoreModule 800 as shown in Figure 1-3.
	Utility 1 and 2 cables are identical and can be interchanged.

2) Connect IDE cable

•Connect the IDE cable to J6 on the CoreModule 800 as shown in Figure 1-3.

Connect to

I/O Board (J5)

Connect to	Utility 2 Cable
I/O Board (J4)
	& Connectors

Utility 1 Cable

J5

& Connectors

J4

IDE Device Cable

and Connectors (J6)

44-pin Connector

CM800QkS_04a

Figure 1-3. Connecting the IDE and Utility Cables

CM800QkS_05a

Video Cable &

Connectors (J1)

Standard power

connector for hard

disk drives (HDD)

found on AT or ATX power supplies.

Ethernet RJ45

Adapter (J3)

Power Adapter Cable

& Connectors (J7)

Figure 1-4. Connecting Video, Ethernet and Power Cables/Adapter

4 QuickStart Guide CoreModule 800