Advantech MIC-3368 manual Introduction

Page 10

1.1 Introduction

The MIC-3368 is a 6U-size CompactPCI™ all-in-one single board with low power Pentium® III 700MHz CPU on-board which complies with PICMG 2.0 R2.1 CompactPCI™ specifications. Targeting performance-demanding applications like computer telephony and communications. Based on Intel® ’s 440GX chipset, the MIC-3368 enhances its performance with 100 MHz front side bus.

High Performance Pentium® III Processor

The MIC-3368 integrated an Intel® low power Pentium® III 700MHz processor with the BGA2 package. The low power Pentium® III 700MHz processor has on-chip 256 KB cache providing high performance with low cost. With the support of a 100MHz CPU bus clock, the MIC-3368 can fulfill customer’s expectations of high-performance computing capability.

Compact Mechanical Design

The MIC-3368 has many functions on a single board with only one-slot width. Advantech provides a CPU heat sink specially designed for the low power Pentium®

IIIprocessor, enabling the MIC-3368 to operate without a cooling fan on the heat sink. It only needs external cooling air from the chassis fans for ventilation. This enables the MIC-3368 to use a Pentium® III CPU within a mere 1-slot wide space.

Single P2P Bridge

The MIC-3368 with single PCI-to-PCI Bridge (Intel® DEC21155) is applicable up to 8-slot enclosure (MIC-3032/MIC-3038) and drive up to seven bus master PCI slots.

PMC (PCI Mezzanine Card) IEEE1386.1 Compliant

The MIC-3368 support up to two PMC sites and compliant with PICMG 2.3 (PCI Mezzanine Card) specification. These two 32-bit PMC interface provides front access capability by PMC modules for various function demanding.

Complete I/O Functions

The MIC-3368 offers all the I/O functions of an industrial computer with the rugged Eurocard form factor. Since two PMC sites knockouts most area of front panel, only few I/O connectors are available on the front panel including one Ethernet interface, one serial port, and one PS/2 K/B and mouse. The rest of I/O have fully connected to the rear I/O module via user-define connector (J3 ~ J5) on the backplane. These I/O contain two Fast Ethernet interfaces, secondary serial port, one USB port, one VGA connector, and one PS/2 keyboard/mouse connector. The front panel also has

MIC-3368 Series User Manual -- Page 2

Image 10
Contents MIC-3368 Acknowledgements Copyright NoticeCE Notification Product warranty Technical Support and Sales Assistance Packing ListHttp//support.advantech.com.tw Contents Programming the Watchdog Timer Figures Tables Hardware Configuration Introduction Specifications Standard SBC FunctionsFunctional Block Diagram 1MIC-3368 functional block diagram Jumpers Jumper SettingsJumper Locations Connectors Clear Cmos JP1Safety Precautions 2MIC-3368 jumper and connector locationsInstalling Sdram SODIMMs Installing CPU Heat Sink Heat sink installationSoftware support Connecting Peripherals IDE Device CN10 VGA Display Connector CN3PS/2 Keyboard and Mouse Connector CN5 Serial Ports CN1 and CN2PMC Connector CN4 Ethernet Configuration CN6 and CN7USB Connector CN4 Card InstallationTo install a card To remove a cardEthernet Software Configuration General Information Utility and DriversFor Microsoft Windows For Other Operating Systems Installation for Windows NTFor Unix \MIC3368\LAN\DOS\E100B.DOS Drivers for LantasticPage AGP-SVGA Installation of Svga Driver Bios Entering Setup Award Bios SetupStandard Cmos Setup Virus Warning Bios Features SetupCPU Internal Cache/External Cache Boot Up Floppy Seek Quick Power On Self TestBoot Sequence Boot Up NumLock StatusTypematic Delay msec Chipset Features SetupTypematic Rate Setting Typematic Rate Char/SecPower Management Power Management SetupVGA Shared Memory Size HDD Power Management 6 PNP/PCI Configuration SetupIntegrated Peripherals Save & Exit Setup Load Setup DefaultsPassword Setting IDE HDD Auto DetectionProgramming Watchdog Timer Programming the Watchdog Timer Data Time IntervalPin Assignments System Slot J1 Connector System Slot P2 Connector System and Peripheral Slots J3 Connector System Slot J4 Connector System Slot J5 Connector Eide Connector CN1 Ethernet RJ-45 Connectors CN5VGA Display connector CN6 RJ45-COM1 Serial Ports CN7Fan Module Connectors CN8 CompactFlash Socket CN9-OptionalSystem I/O Ports Interrupt Assignments14 1st MB Memory Map