3.1 Introduction
The
The module uses two Intel® 82559 fast Ethernet controllers with integrated PHY and is compatible with the Intel® PRO/100+ Server and Client Adapter. The dual Ethernet channel design provides several options for increasing throughput and fault tolerance when running Windows NT 4.0 or NetWare 4.1x and newer versions of these, includes:
•Adapter Fault Tolerance (AFT) - provides automatic redundancy for your Ethernet channel. If the primary channel fails, the secondary takes over.
•Adaptive Load Balancing (ALB) - creates a team of 2 channels to increase transmission throughput. Also includes AFT and ALB. This function works with any
•Fast EtherChannel (FEC) - creates a team of 2 to 4 channels to increase transmission and reception throughput. Also includes AFT. This function requires a Cisco switch with FEC capability. The
3.2 Utility and Drivers
The
General Information:
• \MIC3368\LAN\README.TXT: General information about the drivers.
For Microsoft Windows:
•\MIC3368\LAN\INFO\MS\MS.TXT: Installation instructions for Microsoft Windows
•\MIC3368\LAN\E100BNT.SYS (NDIS 4.0), \MIC3368\LAN\ OEMSETUP.INF: Drivers for Windows NT 4.0
•\MIC3368\LAN\E100B.SYS (NDIS 3), \MIC3368\LAN\ OEMSETUP.INF: Drivers for Windows NT 3.51
•\MIC3368\LAN\NET82557.INF: Drivers for Windows 98
•\MIC3368\LAN\E100BNT.SYS (NDIS 4.0), \MIC3368\LAN\NET82557.INF: Drivers for Windows 95
•MIC3368\LAN\WFW\E100B.38_, \MIC3368\LAN\WFW\OEMSETUP.INF: Drivers for Windows 3.1