Acer power sx/sxb/sc manual System Information, Parameter Description Format

System Information

The following screen appears if you select System Information from the main menu.

	System Information
Processor	Pentium III
Processor Speed	500E MHz
Level 1 Cache	32 KB, Enabled
Level 2 Cache	256 KB, Enabled
Diskette Drive A	1.44 MB 3.5-inch
Diskette Drive B	None
IDE Primary Channel Master	Hard Disk, 4311 M.B.
IDE Primary Channel Slave	None
IDE Secondary Channel Master	............................. None
IDE Secondary Channel Slave	IDE CD-ROM
Total Memory	56 MB + 8192 KB Share Memory
1st Bank	SDRAM, 32 MB
2nd Bank	SDRAM, 32 MB
Serial Port 1	Disabled
Serial Port 2	3F8h, IRQ 4
Parallel Port	378h, IRQ 7
PS/2 Mouse	Installed

This page shows the current basic configuration of your system.

The following table describes the parameters found in the System Information pages:

Parameter		Description	Format
Processor		Specifies the type of processor currently installed in
		your system.
Processor Speed		Specifies the speed of the processor currently installed	Speed in MHz
		in your system.
Level 1 Cache		Specifies the first-level or the internal memory (i.e., the	Cache size in KB
		memory integrated into the processor) size, and
		whether it is enabled or disabled.
Level 2 Cache		Specifies the second-level cache memory size currently	Cache size in KB
		supported by the system.
Diskette Drive A		Shows the diskette drive A type.	Capacity, dimension
Diskette Drive B		Shows the diskette drive B type.	Capacity, dimension
IDE Primary Channel Master		Specifies the current configuration of the IDE device	Drive type, capacity
		connected to the master port of the primary IDE
		channel.
IDE Primary Channel Slave		Specifies the current configuration of the IDE device	Drive type, capacity
		connected to the slave port of the primary IDE channel.
IDE Secondary	Channel	Specifies the current configuration of the IDE device	Drive type, capacity
Master		connected to the master port of the secondary IDE
		channel.
IDE Secondary	Channel	Specifies the current configuration of the IDE device	Drive type, capacity
Slave		connected to the slave port of the secondary IDE
		channel.

26 Chapter 2