Altec Lansing XT2 manual Symptom Possible Problem Solution

Page 7

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

Broken audio

The speaker system is connected to a computer

The broken audio issue should resolve itself once Windows 98SE has

from speakers.

running Windows 98SE.

finished the loading cycle.

 

 

 

 

The computer is running too many applications

Quit one or more applications until the problem is resolved or

 

at the same time.

increase computer memory (RAM) or storage space.

 

 

 

Sound is

The volume is set too high.

The “+” and “–” volume buttons on the right speaker control the

distorted.

 

master volume. Push the “–” button to decrease the volume.

 

 

 

 

If using a computer, the computer operating

Adjust the computer operating system master volume and balance

 

system master volume level is set too high.

levels to the center as a starting point, then adjust the level on the

 

 

speaker using the volume control.

 

 

 

 

If using an alternate audio source, such as an

Reduce the volume level on the alternate audio source.

 

MP3 or CD player, the volume level on the MP3

 

 

or CD player is set too high.

 

 

 

 

 

The audio source is distorted.

WAV files are often of poor quality, so distortion and noise are easily

 

 

noticed. Try a different audio source such as a music CD.

 

 

 

 

The audio source EQ levels are set too high.

Adjust audio source EQ levels to “flat.”

 

 

 

Intermittent

The XT2 is located too close to a GSM cell phone.

Move the GSM cell phone away from the XT2.

buzzing.

 

 

 

 

 

Radio

The XT2 is located too close to a radio tower.

Move your speakers until the interference goes away.

interference.

 

 

 

 

 

Volume output

The volume output cannot be controlled by

Adjust the master volume by using the “+” and “–” volume buttons

cannot be

operating system’s CD level controls.

on the right speaker or the master and wave level controls on the

controlled by

 

computer’s operating system.

the computer

 

 

operating

 

 

system’s CD

 

 

level controls.

 

 

 

 

 

5

Image 7
Contents XT2 Page FCC Note Placing Your Speakers BOX ContentsSETTING-UP Your Speakers Powering Your SpeakersFor Additional Bass Powering onVolume System SpecificationsTroubleshooting Symptom Possible Problem Solution Symptom Possible Problem Solution Avertissement Alimentation DES Enceintes Installation DES EnceintesContenu DE L’EMBALLAGE Mise EN Place DES EnceintesSpécifications DU Système Augmentation DES BassesMise Sous Tension Aigus ET BassesDVD/CD-ROM Dépannage Symptôme Problème Possible SolutionSymptôme Problème Possible Solution Limpie únicamente con un paño seco Distribución InternacionalSuministro DE Potencia a SUS Parlantes Contenido DE LA CajaCómo Instalar SUS Parlantes Cómo Ubicar LOS ParlantesAgudos Y Graves VolumenPara Obtener UN Nivel DE Graves Adicional EncendidoSolución DE Problemas Síntoma Posible Problema Síntoma Posible Problema Solución Para Reduzir O Risco DE Incêndio OU Choque ELÉTRICO, NÃO Alimentação DOS ALTO-FALANTES Configuração DOS ALTO-FALANTESConteúdo DA Caixa Posicionamento DOS ALTO-FALANTESEspecificações do Sistema Para Graves AdicionaisLigando Graves E AgudosDiagnóstico DE Falhas Sintoma Possível Problema Solução Sintoma Possível Problema Solução Page 852 2735-7331 Fax 852