Advantech ARK-7480 manual Lvds Connector Pin Assignment

2.2.8 LVDS Connector

The ARK-7480 comes with a D-Sub 26-pin connector that carries LVDS signal output, and can direct connect to a 36-bit of LVDS LCD Display via external cable.

Figure 2.6: LVDS Connector

The system also provides a jumper for JP4 on internal ARK-7480 moth- erboard for selecting the LCD signal power of 5V or 3.3V, please refer to section 3.3 of Chapter 3 for the jumper table for JP4 setup. The default setting of JP4 is 3.3V.

Table 2.6: LVDS Connector Pin Assignment

Pin	Signal Name	Pin	Signal name
1	LVDS_CLKBP	14	LVDS_CLKBM
2	GND	15	LVDS_YAM0
3	LVDS_YAP0	16	LVDS_YAM1
4	LVDS_YAP1	17	LVDS_YAM2
5	LVDS_YAP2	18	LVDS_CLKAM
6	LVDS_CLKAP	19	GND
7	+3.3 or +5V	20	+3.3 or +5V
8	GND	21	LVDS_YAM3
9	LVDS_YAP3	22	LVDS_YBM0
10	LVDS_YBP0	23	LVDS_YBM1
11	LVDS_YBP1	24	LVDS_YBM2
12	LVDS_YBP2	25	LVDS_YBM3
13	LVDS_YBP3	26	GND

ARK-7480 User Manual 14