The jumper settings are schematically depicted in this manual as follows:
A
pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your appli- cation, contact your local distributor or sales representative before you make any changes.
3.3 Jumper Location
The ARK-7480 Embedded Box Computer has a number of jumpers inside the chassis that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers.
Table 3.1: Jumpers
Jumper No | Function |
JP1 | COM1~ COM6 Ring / Voltage Setting |
JP3 | Clear CMOS |
JP4 | LVDS/LCD Power Setting |
JP5 | COM2 RS-232/422/485 Setting |
| J P 1 | |
| J P 5 | |
| J P 3 | J P 4 |
Figure 3.1: Jumper Location of internal SBC board of ARK-7480
