function can help prevent damage to the system that is caused by over- heating.
4.10 Frequency/Voltage Control
By choosing the Frequency/Voltage Control option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the
Figure 4.13: Frequency/Voltage Control screen
4.11 Password Setting
To change the password:
1.Choose the “Set Password” option from the “Initial Setup Screen” menu and press <Enter>.The screen will display the following message:
Please Enter Your Password
Press <Enter>
2.If the CMOS is good or if this option has been used to change the default password, the user is asked for the password stored in the CMOS. The screen will display the following message:
62 |