Advantech ARK-7480 manual Power connected IDE Connected

13.Stacking back the drive bay and connect the power and IDE interface.

Power connected

IDE Connected

Figure 3.24: Stacking back the drive bay and connect the power and IDE

interface

14. Reverse the step 5.~ step 1. to assembly ARK-7480 back.

3.15Installation of the Multi Card Reader Drive (for model of ARK-7480-200A1 only)

You can attach one Multi Card Reader Drive to the ARK-7480’s bottom drive bay. The following are instructions for installation:

1.Remove the power cord.

2.Unscrew the four screws from TOP cover of the ARK-7480. (Please refer to Figure 3.1)

3.Remove the TOP cover of the ARK-7480.

4.Unscrew the four screws from card depress bridge bracket. (Please refer to Figure 3.2)

5.Remove the card depress bridge bracket

6.Unscrew the two screws that fixed for bottom drive bay inside of ARK- 7480-200A1 chassis. (Please see Figure 3.17)

7.Separate the bottom drive bay from the main chassis of ARK-7480. (Please see Figure 3.18)

39 Chapter3