Siemens AFI5100 installation manual Product Description, Product Numbers, Prerequisites

Input Point Module (AFI5100)

1 Input Point Module (AFI5100)

Fig. 1 Input Point Module

1.1Product Description

The AFI5100 is an Input Point Module used as part of a Siemens integrated access control and security solution. It provides an interface between an Advanced Access Controller (ACC) and up to 32 input devices used to monitor a secure facility.

The AFI5100 continuously monitors the status of all input devices connected; for example, Passive Infrared Detectors (PIRs). Any changes in state are instantly communicated to the ACC and then on to the Host system if necessary.

1.2Product Numbers

6FL7820-8CB10 AFI5100 – Input Point Module and base-plate

1.3Prerequisites

	Input Devices to be connected to the IPM
	Cabling (RS-485)
	Required Tools & Materials
	Medium-duty drill and associated drill-bits (if required)
	4 mounting screws or standoffs (approx. 4mm)
	Flat-blade terminal screwdriver
	Wire cutters
	Cable strippers
	5
Siemens Building Technologies
Fire Safety & Security Products	02.2005