Troubleshooting
Issue | Solution and Care | See | |
Page | |||
|
| ||
The USB flash memory device, | The USB flash memory device, SD memory card, or printer is not |
| |
SD memory card, or printer is not | supported by this unit. |
| |
recognized. | For information regarding available USB flash memory devices, | – | |
| SD memory cards, and printers, refer to the following site: | ||
|
| ||
| http://panasonic.co.jp/pcc/products/en/eboard/ |
| |
|
| ||
| Confirm that the USB cable is properly connecting the printer and | 20 | |
| the unit, or put the unit into standby mode. | ||
|
| ||
|
|
| |
| The USB flash memory device or printer is connected via a USB |
| |
| hub. | – | |
| Do not connect via a USB hub. |
| |
|
|
| |
It takes a long time for the unit to | The USB flash memory device has not been used since it was |
| |
recognize the USB flash memory | formatted using FAT32. | – | |
device. | Once a file has been written, subsequent operations will be | ||
| |||
| performed much more quickly. |
| |
|
|
| |
When images are saved, they | Images saved as JPEG are rotated 90 degrees. |
| |
are rotated 90 degrees. | Use graphic software to rotate the image back to the position it | – | |
| was displayed on the screen. |
| |
The computer does not | Confirm that the USB cable is properly connected on both sides or | 21 | |
recognize this unit. | put the unit into standby mode. | ||
| |||
| This unit is connected via a USB hub. | – | |
| Do not connect via a USB hub. | ||
|
| ||
|
|
| |
The image file is not displayed | Open the Removable Disk displayed on the computer screen, and | 21 | |
after copying to a computer. | click [Refresh] from the [View] in the Windows Explorer window. | ||
| |||
|
|
| |
When the unit’s power is turned | The battery is drained. |
| |
on, the time | Change the battery, then set time. | 30 | |
displayed. |
|
|
32