Panasonic UB-5338C, UB-5838C operating instructions Optional Stand

Page 43

Assembling the unit

7	After unscrew the 4 screws from the lower
	center frame cover, remove it.

[Optional Stand]

10 Attach the optional stand to the unit.

•Each stands has four holes (A, B, C, D).

1)Attach the stand to the unit with the locking caster up.

2)When attaching the unit to the stand at normal height (1,830 mm [6' 2/32" ]), tighten the two screws (included in the stand) with 1 washers using the hexagonal wrench through holes A and C.

[Normal height]

8	Fasten the wall-mounting clasps of the unit
	securely to the wall with the 4 appropriate wall-

mounting hardware.

Screw

1Washer

C

B

A

Wall-mounting hardware

Note

•The 4 wall-mounting hardware are not included with the electronic board. Please purchase M6-size screws appropriate for your wall.

9 Attach the lower frame cover removed in step 7.

•Advance to “Electronic Board Operations Check” on page 45.

Note

•Use the washer included with the electronic board. Do not use the washer included with the stand.

•Do not tighten the screw too much. This may deform the stand.

•By tightening the two screws with washers through holes A and B, the unit will be positioned 100 mm (3 15/16" ) higher than normal height (1,930 mm [6' 4" ]).

[higher than normal height]

C

B

A

Installation

43

Image 43

Contents For U.S.A. only Installation Manual Included for qualified service personnelFor your future reference AccessoriesPlease observe carefully the following precaution Things you should keep a recordPage Illegal Duplication Exemption of Liability TrademarksPrinting with an External Printer FeaturesStoring on a USB Flash Memory Device Storing on an SD Memory CardTable of Contents Power and Ground Connection For Your SafetyBattery For Your SafetyInstallation and Relocation Operating SafeguardsFor Your Safety Power How to replace the fuse Safety Information For United Kingdom onlyPrecautions For Netherlands BatteryFor U.S.A For BrazilMemory Device Part Names and FunctionsFor Printer For USB FlashPart Names and Functions Mode Key Advance Key Display Set-up Key Start/Stop KeyMode Key Control PanelOperation Password function Before UsingScreen Erase Announce function Scanning Scanning Storing images on a USB flash memory deviceMemory card Storing images on an SDPrinting with an external printer Computer Scanning to a computerSystem Requirements Scanning to a computerScanning Moving the Electronic Board Electronic Electronic BoardBoard Setting the UnitSetting the number of copies Setting for scanning time displayFile format set-up Setting the UnitSetting the current time Setting for Full Size Scanning UB-5838C onlyElectronic Board Setting the Password Testing the Printer Cleaning the Screen and the Unit Daily Care and MaintenanceCaring for the Eraser Daily Care and Maintenance Replacing the Battery for the unit clockIssue Solution and Care See TroubleshootingTroubleshooting Error Code Cause Remedy See Error CodesTroubleshooting See Error Code Cause RemedyModel No UB-5838C UB-5338C SpecificationsSeparately Available Items SpecificationsElectronic Board Operations Check For qualified service personnelFor Your Safety Assembling the unit Optional Stand Assembly UE-608035For Your Safety Assembling the unit Accessories for assemblingIllustration ’ty Remarks Assembling the unit Assembly Assembling the unit When using the stand, advance to stepWall-mounting Optional Stand Assembling the unit Electronic Board Operations Check Setting the timeBefore Operation Check Step Points to Check Condition Solutions Electronic Board Operations Check Operation Check ProcedureRepacking Checking the Wall Wall-Mounting ConstructionBefore Starting Mm 29 Wall-Mounting Construction Metal or Concrete walls Wooden walls Plasterboard wallsStand Base Optional Stand Assembly UE-608035Included Parts Part name Illustration ’tyOptional Stand Assembly UE-608035 Assembly Instructions Optional Stand Assembly UE-608035 PJQXC0259ZA F0509E0 Panasonic Canada IncPanasonic Business Systems U.K Panasonic Marketing Europe GmbH